Precipitation Behavior of ω Phase and ω→α Transformation in Near β Ti-5Al-5Mo-5V-1Cr-1Fe Alloy during Aging Process
Open Access
Abstract
In this work, the precipitation behavior of the ω phase and ω→α transformation in Ti-5Al-5Mo-5V-1Cr-1Fe (Ti-55511) alloy was investigated during isothermal aging at 450 °C. The results show that the α precipitates increase with the increasing of aging time, resulting from the β→α and ω→α transformations. The ω→→α transformation involves the formation and evolution of the isothermal ω phase. The formation of the isothermal ω phase occurs after 30 min and ends at 120 min, which is caused by the embryonic ω phase to isothermal ω phase transformation. Small angle neutron scattering (SANS) results indicates that the evolution of the isothermal ω phase goes through the increasing average size and aspect ratio from 24.7 to 47.0 nm and from 2.1 to 2.7 respectively, and the morphology evolution of the ω particle from ellipsoid to spindle-like. Moreover, the isothermal ω phase assists the α phase to nucleate at the ω/β interface, which involves the changes in elemental composition. The α phase is enriched in Al. Compared to the α phase, the element of Mo, V and Cr in the isothermal ω phase is lower. The Fe element is uniformly distributed in the isothermal ω phase and β matrix but lean in the α phase.Keywords
Funding Information
- National Natural Science Foundation of China (No. 51871242)
This publication has 38 references indexed in Scilit:
- Microstructure, texture evolution and mechanical properties of cold rolled Ti-32.5Nb-6.8Zr-2.7Sn biomedical beta titanium alloyJournal of Materials Science & Technology, 2018
- Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductilityMaterials Science and Engineering: A, 2017
- State of the Art in Beta Titanium Alloys for Airframe ApplicationsJOM, 2015
- High strength beta titanium alloys: New design approachMaterials Science and Engineering: A, 2015
- Perspectives on Titanium Science and TechnologyActa Materialia, 2013
- Relationship between lamellar α evolution and flow behavior during isothermal deformation of Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloyMaterials Science and Engineering: A, 2012
- Analysis of the specific features of loading of the elements of landing gears of aircrafts aimed at the evaluation of the load-bearing capacity of the structureStrength of Materials, 2008
- Fatigue fracture of a nose landing gear in a military transport aircraftEngineering Failure Analysis, 2006
- The Use of β Titanium Alloys in the Aerospace IndustryJournal of Materials Engineering and Performance, 2005
- Recent developments in microstructure/property relationships of beta titanium alloysMaterials Science and Engineering: A, 1999