The Prototype Inductive Adder With Droop Compensation for the CLIC Kicker Systems
Open Access
- 1 April 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 42 (10) , 2899-2908
Abstract
The Compact Linear Collider (CLIC) study is exploring the scheme for an electron-positron collider with high luminosity and a nominal center-of-mass energy of 3 TeV. The CLIC predamping rings and damping rings (DRs) will produce, through synchrotron radiation, an ultralow emittance beam with high bunch charge. To avoid beam emittance increase, the DR kicker systems must provide extremely flat, high-voltage, pulses. The specifications for the extraction kickers of the DRs are particularly demanding: the flattops of the pulses must be ±12.5 kV with a combined ripple and droop of not more than ±0.02% (±2.5 V). An inductive adder is a very promising approach to meeting the specifications. Recently, a five-layer prototype has been built at CERN. Passive analog modulation has been applied to compensate the voltage droop, for example of the pulse capacitors. The output waveforms of the prototype inductive adder have been compared with predictions of the voltage droop and pulse shape. Conclusions are drawn concerning the design of the full-scale prototype inductive adder.Keywords
This publication has 5 references indexed in Scilit:
- Initial measurements on a prototype inductive adder for the CLIC kicker systems2013
- Preliminary design of the pulse generator for the CLIC DR extraction system2011
- Induction Accelerators2011
- Analog amplitude modulation of a high voltage, solid state inductive adder, pulse generator using MOSFETs2003
- MIA modulator for the LLNL “small recirculator” experimentNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2001