Controlling calcium and phosphate ion release of 3D printed bioactive ceramic scaffolds: An in vitro study
Authors:
Open Access
- 16 June 2017
- journal article
- research article
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 6 (2) , 157-164
Abstract
This paper characterizes in an in vitro setting the release of calcium (Ca) and phosphate (PO4) of 3D printed bioactive ceramic scaffold prepared from extrudable paste containing hydroxyapatite and β-tricalcium phosphate (β-TCP). Hydroxyapatite and β-TCP were calcined at 800 °C for 11 h, fabricated into four experimental groups (100% HA, 100% β-TCP, 15%/85% HA/β-TCP, and 15%/85% HA/β-TCP (design)), sintered to 1100 °C for 4 h. Calcium and phosphorus concentrations were evaluated using ICP spectroscopy, and the release of Ca and PO4 ions during dissolution of the CaP-based scaffolds was measured by submerging in 0.05 mol/L Tris(hydroxymethyl)aminomethane-HCl and maintaining a temperature of 37 °C. The Ca and PO4 concentrations of the solutions were measured with the utilization of a calcium assay kit and a phosphate assay kit and read in a UV–visible spectrophotometer. The 100% HA scaffold group showed the greatest concentration of Ca ions (~1.9 mg/dL), but ultimately released at a lower amount as time increased; the 100% HA scaffold also showed the lowest total amount of calcium ions released over the course of evaluation. The results for the 100% β-TCP were on the opposite of the HA with the highest amount of calcium ion release over the study. While the PO4 ion release showed a similar trend as those observed with Ca ions with an apparent difference in the 100% HA scaffold group. There was nearly 0 mg/dL of the phosphate ions released in the first 24 h, in comparison to the amount of Ca ions released during the same time frame. Since various formulations can lead to different properties of these bioactive ceramic scaffolds, it is important to understand how the tailoring of this important biphasic material can impact the long-term outcome of an ever-important in vivo clinical trial in the future.Keywords
This publication has 23 references indexed in Scilit:
- Bony Engineering Using Time-Release Porous Scaffolds to Provide Sustained Growth Factor DeliveryJournal of Craniofacial Surgery, 2012
- Synthesis and characterization of porous biphasic calcium phosphate scaffold from different porogens for possible bone tissue engineering applicationsScience of Sintering, 2011
- Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applicationsActa Biomaterialia, 2006
- Hypophosphatemia: An update on its etiology and treatmentThe American Journal of Medicine, 2005
- Synthetic bone graft substitutesAnz Journal of Surgery, 2001
- The effect of calcium phosphate ceramic composition and structure on in vitro behavior. I. DissolutionJournal of Biomedical Materials Research, 1993
- Effect of calcium phosphate coating characteristics on early post-operative bone tissue ingrowthBiomaterials, 1990
- Transformation of biphasic calcium phosphate ceramicsin vivo: Ultrastructural and physicochemical characterizationJournal of Biomedical Materials Research, 1989
- Physicochemical characterization of deposits associated with HA ceramics implanted in nonosseous sitesJournal of Biomedical Materials Research, 1988
- Significance of the Porosity and Physical Chemistry of Calcium Phosphate Ceramics Biodegradation‐BioresorptionAnnals of the New York Academy of Sciences, 1988