Improved Tribocorrosion Behavior Obtained by In-Situ Precipitation of Ti2C in Ti-Nb Alloy
Open Access
Abstract
Novel in-situ Ti-based matrix composites (TMCs) were developed through the reactive hot pressing of Ti + NbC powder blends. Due to the chemical reaction that occurred in the solid-state during processing, the produced samples were composed of an Nb-rich β-Ti phase that formed a metallic matrix along with Ti2C as a reinforcing phase. By employing different proportions of Ti:NbC, the phase composition of the alloys was designed to contain different ratios of α-Ti and β-Ti. The present work investigated the corrosion and tribocorrosion behavior of the composites, compared to unreinforced Ti, in a phosphate-buffered solution (PBS) at body temperature. Corrosion tests included potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Tribocorrosion tests were carried out using a ball-on-plate tribometer with sliding performed at open circuit potential (OCP) and under anodic potentiostatic conditions. Results showed that the stabilization of the β phase in the matrix led to a decrease in the hardness. However, the formation of the in-situ reinforcing phase significantly improved the tribocorrosion behavior of the composites due to a load-carrying effect, lowering the corrosion tendency and kinetics under sliding. Furthermore, localized corrosion was not observed at the interface between the reinforcing phase and the matrix.Keywords
Funding Information
- Fundação de Amparo à Pesquisa do Estado de São Paulo (#2017/24300-4, #2018/00746-6, #2019/07953-0, UIDB/04436/2020)
- Science and Technology (FCT) (#2017/24300-4, #2018/00746-6, #2019/07953-0, UIDB/04436/2020)
This publication has 42 references indexed in Scilit:
- Grain growth, phase evolution and properties of NbC carbide-doped WC-10AISI304 hardmetals produced by pseudo hot isostatic pressingJournal of Alloys and Compounds, 2013
- The combined role of wear particles, macrophages and lymphocytes in the loosening of total joint prosthesesJournal of The Royal Society Interface, 2008
- Triboelectrochemical techniques and interpretation methods in tribocorrosion: A comparative evaluationTribology International, 2008
- Tribo-corrosion of coatings: a reviewJournal of Physics D: Applied Physics, 2007
- Influence of microstructure and alloying elements on corrosion behavior of Ti–13Nb–13Zr alloyCorrosion Science, 2004
- Microstructural and mechanical characteristics of in situ metal matrix compositesMaterials Science and Engineering: R: Reports, 2000
- The mechanical properties of in-situ compositesJOM, 1997
- Dry sliding wear of discontinuously reinforced aluminum composites: review and discussionWear, 1995
- Fretting in orthopaedic implants: A reviewWear, 1994
- Interfacial phenomena in metal-matrix compositesComposites, 1994