Modeling of the friction in the tool-workpiece system in diamond burnishing process
Authors:
- J.T. MaximovJMJ.T. Maximov
- A.P. AnchevAAA.P. Anchev
- G.V. DunchevaGDG.V. Duncheva
- 25 December 2015
- journal article
- Published by Techno-Press in Coupled Systems Mechanics
- Vol. 4 (4) , 279-295
Abstract
Modeling of the friction in the tool-workpiece system in diamond burnishing process diamond burnishing;tool-workpiece system;slide friction coefficient;geometric nonlinearity;dynamic deflection;strain gage measurement; The article presents a theoretical-experimental approach developed for modeling the coefficient of sliding friction in the dynamic system tool-workpiece in slide diamond burnishing of low-alloy unhardened steels. The experimental setup, implemented on conventional lathe, includes a specially designed device, with a straight cantilever beam as body. The beam is simultaneously loaded by bending (from transverse slide friction force) and compression (from longitudinal burnishing force), which is a reason for geometrical nonlinearity. A method, based on the idea of separation of the variables (time and metric) before establishing the differential equation of motion, has been applied for dynamic modeling of the beam elastic curve. Between the longitudinal (burnishing force) and transverse (slide friction force) forces exists a correlation defined by Coulomb's law of sliding friction. On this basis, an analytical relationship between the beam deflection and the sought friction coefficient has been obtained. In order to measure the deflection of the beam, strain gauges connected in aKeywords
This publication has 6 references indexed in Scilit:
- A new approach to modeling the dynamic response of Bernoulli-Euler beam under moving loadCoupled Systems Mechanics, 2014
- A novel method and tool which enhance the fatigue life of structural components with fastener holesEngineering Failure Analysis, 2013
- Surface layer characteristics due to slide diamond burnishing with a cylindrical-ended toolJournal of Materials Processing Technology, 2011
- Fatigue strength of chromium coated elements and possibility of its improvement with slide diamond burnishingSurface and Coatings Technology, 2009
- Numerical study of double cold expansion of the hole at crack tip and the influence on the residual stresses fieldComputational Materials Science, 2008
- Finite Element Modeling of Hard Roller Burnishing: An Analysis on the Effects of Process Parameters Upon Surface Finish and Residual StressesJournal of Manufacturing Science and Engineering, 2007