Seismic bearing capacity of a strip footing on rock slopes
Author:
- 1 August 2009
- journal article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 46 (8) , 943-954
Abstract
Most of the seismic calculations currently used for the evaluation of seismic bearing capacity are formulated in terms of a linear Mohr–Coulomb failure criterion. However, experimental evidence shows that a nonlinear failure criterion is able to represent fairly well the failure of almost all types of rocks. In this paper, a nonlinear Hoek–Brown failure criterion is used to estimate the seismic bearing capacity factor of a strip footing on rock slopes in a limit analysis framework. Quasi-static representation of earthquake effects using a seismic coefficient is adopted for the seismic bearing capacity calculations. A linear Mohr–Coulomb failure criterion, tangent to the nonlinear Hoek–Brown failure criterion, is used to derive the objective function that is to be minimized. Upper-bound solutions are obtained by optimization. For static problems, bearing capacity factors related to uniaxial compressive strength, Nσ, are compared. For seismic problems, Nσfactors for different ground inclinations are presented for practical use in rock engineering.Keywords
This publication has 26 references indexed in Scilit:
- Seismic bearing capacity of foundations on reinforced soil slopesGeotextiles and Geomembranes, 2005
- Influence of a nonlinear failure criterion on the bearing capacity of a strip footing resting on rock mass using a lower bound approachCanadian Geotechnical Journal, 2003
- Seismic stability analysis of reinforced slopesSoil Dynamics and Earthquake Engineering, 2000
- Lower bound shakedown analysis of layered pavements using discontinuous stress fieldsComputer Methods in Applied Mechanics and Engineering, 1998
- Seismic Bearing Capacity of Shallow Strip Foundations on Dry SoilsSoils and Foundations, 1997
- A technique for defining non-linear shear strength envelopes, and their incorporation in a slope stability method of analysisQuarterly Journal of Engineering Geology, 1994
- Slope stability analyses for materials with a non‐linear failure envelopeInternational Journal for Numerical and Analytical Methods in Geomechanics, 1988
- Shear strength and stress—strain behaviour of Athabasca oil sand at elevated temperatures and pressuresCanadian Geotechnical Journal, 1987
- Stability analysis of slopes with general nonlinear failure criterionInternational Journal for Numerical and Analytical Methods in Geomechanics, 1987
- Upper Bound Limit Analysis of Soil with Non-Linear Failure CriterionSoils and Foundations, 1983