A DPWM Modulation Strategy to Reduce Common-Mode Voltage for Indirect Matrix Converters Based on Active-Current Vector Amplitude Characteristics
Authors:
- 8 September 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (8) , 8102-8112
Abstract
Based on the characteristics that the amplitude of active-current vector in the rectifier stage is zero when the zero-voltage vector is used in the inverter stage, and any one from the six active-current vectors can be selected, a novel discontinuous pulsewidth modulation (DPWM) strategy for the indirect matrix converter is proposed in this article to reduce the common-mode voltage (CMV). In this DPWM strategy, the reference current vector in the rectifier stage is synthesized by two adjacent active-current vectors, and the reference voltage vector in the inverter stage is synthesized by two adjacent active-voltage vectors and one zero-voltage vector. When zero-voltage vectors are used in the inverter stage, an appropriate active-current vector with the lowest input phase voltage among the two adjacent active-current vectors is used to produce a lower CMV. Under the same switching loss, the proposed strategy has a better input performance and better output performance in high voltage transfer ratio than conventional SVM. Finally, the effectiveness of the modulation strategy is verified by simulation and experiments.Keywords
Funding Information
- National Natural Science Foundation of China (51907049, 52077055)
- Natural Science Foundation of Hebei Province (E2020202095, E2018202252)
- Hebei Talent Program (E2016100004)
- State Key Laboratory of Reliability and Intelligence of Electrical Equipment (EERI_KF2020011, EERI_OY2020007, EERI_PI20200010)
This publication has 24 references indexed in Scilit:
- A Finite Control Set Model Predictive Control Method for Matrix Converter With Zero Common-Mode VoltageIEEE Journal of Emerging and Selected Topics in Power Electronics, 2017
- Space-Vector-Based Generalized Discontinuous Pulsewidth Modulation for Three-Level Inverters Operating at Lower Modulation IndicesIEEE Journal of Emerging and Selected Topics in Power Electronics, 2017
- Modulation Techniques for Enhanced Reduction in Common-Mode Voltage and Output Voltage Distortion in Indirect Matrix ConvertersIEEE Transactions on Power Electronics, 2016
- Filter Design of Direct Matrix Converter for Synchronous ApplicationsIEEE Transactions on Industrial Electronics, 2014
- Dual Three-Phase Indirect Matrix Converter With Carrier-Based PWM MethodIEEE Transactions on Power Electronics, 2013
- Modulation Strategies to Reduce Common-Mode Voltage for Indirect Matrix ConvertersIEEE Transactions on Industrial Electronics, 2011
- Predictive Strategy to Control Common-Mode Voltage in Loads Fed by Matrix ConvertersIEEE Transactions on Industrial Electronics, 2008
- Discontinuous Space-Vector Modulation for Three-Level PWM RectifiersIEEE Transactions on Power Electronics, 2008
- A parallel matrix converter system2006
- Matrix converters: a technology reviewIEEE Transactions on Industrial Electronics, 2002