Shear Strength of Hybrid Fibre-Reinforced Ternary Blend Geopolymer Concrete Beams under Flexure
Open Access
Abstract
The need to promote sustainable civil infrastructure is one of the most important concerns in the construction industry. Geopolymer composites are one of the promising eco-friendly materials for the development of low carbon concrete. The main objective of this experimental investigation is to study the effect of hybrid fibres on the shear strength of flexural members made with ternary blend geopolymer concrete (TGPC). A total number of 27 reinforced concrete beams of size 100 mm × 150 mm × 1200 mm were cast and tested for shear. M55 grade of concrete was considered in this study. Crimped steel fibres and polypropylene fibres with an aspect ratio of 66 and 300, respectively, were used in this work. The main variables considered in this investigation involve two volume proportions of steel fibres, viz., 0.5% and 1% as well as four volume proportions of polypropylene fibres viz., 0.1%, 0.15%, 0.2% and 0.25%. The hybrid fibre-reinforced ternary blend geopolymer concrete (HTGPC) beams were compared with TGPC beams without fibres. From the test results, it was clear that incorporating hybrid fibres improved the shear strength and changed the type of failure of the beam from shear to flexure. Moreover, a method to predict the ultimate shear strength of HTGPC was proposed, and the estimated values were found to be the same as the test results.Keywords
This publication has 35 references indexed in Scilit:
- Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): Experiments and modelingConstruction and Building Materials, 2014
- Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRCConstruction and Building Materials, 2014
- Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibersComposites Part B: Engineering, 2014
- Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibresCement and Concrete Composites, 2007
- Bond performance of reinforcing bars in inorganic polymer concrete (IPC)Journal of Materials Science, 2007
- Proposed classification of HPFRC composites based on their tensile responseMaterials and Structures, 2006
- Shear strength of reinforced concrete beams with a fiber concrete matrixCanadian Journal of Civil Engineering, 2006
- Effectiveness of stirrups and steel fibres as shear reinforcementCement and Concrete Composites, 2004
- Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fractionCement and Concrete Research, 2003
- Fracture properties of concrete reinforced with steel–polypropylene hybrid fibresCement and Concrete Composites, 2000