Gelcasting and Pressureless Sintering of Translucent Alumina Ceramics
Authors:
- 18 March 2008
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 91 (5) , 1700-1702
Abstract
Gelcasting is a very useful technique for producing ceramic parts with complex shapes. In this work, gelcasting in air and pressureless sintering in hydrogen were applied to manufacture translucent alumina ceramics. A stable suspension with 75 wt% solids was prepared by ball milling. Trapped bubbles were removed completely before casting to obtain homogeneous green bodies. Final sintering was carried out in a hydrogen furnace at 1850°C for 3 h. Homogeneous microstructures of both calcined and sintered bodies were obtained. The in‐line transmission of the sample with a thickness of 0.5 mm increased gently from 9% to 10% in the wavelength range of 190–1100 nm.Keywords
This publication has 8 references indexed in Scilit:
- Gelcasting of Alumina Using Epoxy Resin as a Gelling AgentJournal of the American Ceramic Society, 2007
- Effects of the Homogeneity of Particle Coordination on Solid‐State Sintering of Transparent AluminaJournal of the American Ceramic Society, 2006
- Effect of grain size on transmittance and mechanical strength of sintered aluminaMaterials Science and Engineering: A, 2004
- Transparent Sintered Corundum with High Hardness and StrengthJournal of the American Ceramic Society, 2003
- Characteristics of translucent alumina produced by slip casting method using gypsum moldJournal of Materials Science, 2002
- Properties of rare earth oxide doped translucent polycrystalline aluminaJournal of Materials Processing Technology, 2001
- Translucent Alumina Produced by Slip-Casting Using a Gypsum Mold.Journal of the Ceramic Society of Japan, 2000
- Sintering Crystalline Solids. II. Experimental Test of Diffusion Models in Powder CompactsJournal of Applied Physics, 1961