Multi-element direct design using a freeform surface for a compact illumination system
Authors:
- 9 November 2017
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 56 (32) , 9090-9097
Abstract
An iterative optimization algorithm is introduced to address the surface iterative errors as well as source extension issues in a freeform illumination system for producing satisfactory illumination distribution. A unique two-parameter coordinate system is utilized to represent the emitted ray directions. Then, the direction vector for the incident rays, which propagate through several surfaces, is obtained using ray-tracing techniques. Based on the mapping between the incoming rays and a target grid, a freeform surface is generated as a good starting design. An iterative optimization strategy is further employed to alleviate the deterioration of illumination distribution on the target region, and the uniformity of the illumination system is evaluated during optimization. Very few variables are demanded, and more flexibility in the design of the freeform surface is offered. Successive iterations can be performed until the desired result is attained. An optical system is used as an example to demonstrate the validity of the proposed method, and numerical simulations are carried out to evaluate the optical performance. The simulation results show that a small angular intensity distribution and prescribed rectangular illumination pattern can be achieved simultaneously.Keywords
This publication has 26 references indexed in Scilit:
- Freeform optical design for a nonscanning corneal imaging system with a convexly curved imageApplied Optics, 2017
- Combining freeform optics and curved detectors for wide field imaging: a polynomial approach over squared apertureOptics Express, 2017
- Design of asymmetric freeform lens for low glared LED street light with total internal reflectionOptics Express, 2016
- Full Resolution, Low Crosstalk, and Wide Viewing Angle Auto-Stereoscopic Display With a Hybrid Spatial-Temporal Control Using Free-Form Surface Backlight UnitJournal of Display Technology, 2015
- Freeform illumination lens design using composite ray mappingApplied Optics, 2015
- Method of achieving a wide field-of-view head-mounted display with small distortionOptics Letters, 2013
- Demonstration of a simplified optical mouse lighting module by integrating the non-Lambertian LED chip and the free-form surfaceApplied Optics, 2012
- Optimization design of irradiance array for LED uniform rectangular illuminationApplied Optics, 2012
- Freeform LED lens for uniform illuminationOptics Express, 2008
- Discontinuous free-form lens design for prescribed irradianceApplied Optics, 2007