Effect of nickel additions on microstructure evolution and mechanical properties of low-alloy Cr-Mo cast steel
Authors:
Open Access
- 1 June 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 541 (1) , 012050
Abstract
This paper presents investigation of nickel additions on the low-alloy Cr-Mo cast steel which was normalized at temperature of 920 °C. In this experiment, approximately 0.3, 0.5, and 1.0 wt% Ni was added into the Fe-1.0Mn-0.8Cr-0.4Mo cast steel. The microstructure of low-alloy Cr-Mo cast steel was observed by optical microscope and scanning electron microscope, and the phase compositions were identified by EDX analysis. Tensile, hardness, and Charpy impact tests were conducted to investigate correlation between nickel additions to microstructure characteristics and mechanical properties. The results show that increasing nickel from 0.3 to 1.0 wt% on the alloys has improved the strength without sacrificing the impact toughness. Ni addition into low alloy steel increased the austenite stability due to the grain refinement. The strength was found increase linearly with Ni addition which may caused mainly by solid solution strengthening due to Ni dissolved into the ferrite matrix.Keywords
This publication has 12 references indexed in Scilit:
- Phase stability, physical properties and strengthening mechanisms of concentrated solid solution alloysCurrent Opinion in Solid State and Materials Science, 2017
- Bainitic Transformation and Properties of Low Carbon Carbide-Free Bainitic Steels with Cr AdditionMetals, 2017
- Effect of Ni addition on the mechanical behavior of quenching and partitioning (Q&P) steelMaterials Science and Engineering: A, 2017
- Influence of Ni addition on erosive wear characteristics of multi-component white cast iron at elevated temperatureWear, 2017
- Effects of nickel on low-temperature impact toughness and corrosion resistance of high-ductility ductile ironMaterials & Design (1980-2015), 2012
- Influence of Nickel and Manganese on Microstructure and Mechanical Properties of Shielded Metal Arc-Welded API-X80 SteelJournal of Materials Engineering and Performance, 2011
- Atomistic simulations of solid solution strengthening of α-ironComputational Materials Science, 2011
- High Performance Bainitic SteelsMaterials Science Forum, 2005
- Internal damage processes in low alloy chromium–molybdenum steels during high-temperature creep serviceJournal of Materials Processing Technology, 2004
- Effect of Mn and Ni on the Variation of the Microstructure and Mechanical Properties of Low-carbon Weld Metals.ISIJ International, 2000