High-Temperature Dynamic Mechanical Properties Characterization of Polymer Coatings via Nanoindentation
- 14 December 2021
- journal article
- research article
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 144 (2)
Abstract
Polymer coatings are widely used in industrial applications. The mechanical properties of these polymer coatings are known to vary with temperature and deformation rate. The characterization of the dynamic mechanical properties of these coatings at high temperatures via traditional uniaxial testing is challenging often due to their brittleness and small size. In this paper, the mechanical properties of polymer coatings are reported with emphasis on their dynamic mechanical properties at temperatures up to 280 °C characterized by a dynamic nanoindentation technique with a sharp indenter tip. Nanoindentation was used to characterize the mechanical response with emphasis on dynamic mechanical properties of polymer coatings enclosed in a high-temperature stage. To verify the method, the viscoelastic properties of a reference polyethylene terephthalate polyester film were also characterized by uniaxial cyclic tensile testing which exhibited an excellent agreement with the proposed technique. The proposed nanoindentation method can be applied to other polymer coatings and thin films that are used in applications at high temperatures.Keywords
This publication has 39 references indexed in Scilit:
- Self-healing ion-permselective conducting polymer coatingJournal of Materials Chemistry, 2010
- Transparent Barrier Coatings on High Temperature Resisting Polymer Substrates for Flexible Electronic ApplicationsJournal of the Electrochemical Society, 2010
- Nanoindentation and the dynamic characterization of viscoelastic solidsJournal of Physics D: Applied Physics, 2008
- Contact creep compliance of viscoelastic materials via nanoindentationJournal of Materials Research, 2006
- Plane-strain Bulge Test for Thin FilmsJournal of Materials Research, 2005
- Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradientsActa Materialia, 2005
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Nano-Scale Viscoelastic Properties of Polymer MaterialsMRS Proceedings, 1997
- A new bulge test technique for the determination of Young's modulus and Poisson's ratio of thin filmsJournal of Materials Research, 1992
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992