Evaluation of the solidification process in a double‐tube latent heat storage unit equipped with circular fins with optimum fin spacing
Open Access
- 9 May 2023
- journal article
- research article
- Published by Wiley in Energy Science & Engineering
- Vol. 11 (7) , 2552-2570
Abstract
In this study, the effect of fin number and size on the solidification output of a double‐tube container filled with phase change material (PCM) was analyzed numerically. By altering the fins' dimensions, the PCM's heat transfer performance is examined and compared to finless scenarios. To attain optimal performance, multiple inline configurations are explored. In addition, the initial conditions of the heat transfer fluid (HTF), including temperature and Reynolds number, are considered in the analysis. The research results show a significant impact of longer fins with higher numbers on improving the solidification rate of PCM. The solidification rate increases by 67%, 170%, 308%, and 370% for cases with 4, 9, 15, and 19 fins, respectively, all with the same fin length and initial HTF boundary condition. The best case results in a solidification time that is 4.45 times shorter compared to other fin number and dimension scenarios. The study also found that moving from Reynolds numbers 500 to 1000 and 2000 reduced discharging times by 12.9% and 22%, respectively, and increased heat recovery rates by 14.4% and 27.9%. When the HTF entrance temperature was 10°C and 15°C, the coolant temperature showed that the entire discharging time decreased by 37.5% and 23.1% relative to the solidification time when the initial temperature was 20°C. Generally, this work highlights that increasing the length and number of fins enhances thermal efficiency and the phase change process.Keywords
This publication has 51 references indexed in Scilit:
- Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combinationApplied Energy, 2017
- A GIS-based assessment of Tibet's potential for pumped hydropower energy storageRenewable and Sustainable Energy Reviews, 2017
- Overview of energy storage in renewable energy systemsInternational Journal of Hydrogen Energy, 2016
- Phase change in multi-tube heat exchangersRenewable Energy, 2016
- Thermal energy charging behaviour of a heat exchange device with a zigzag plate configuration containing multi-phase-change-materials (m-PCMs)Applied Energy, 2015
- Experimental study of melting and solidification of PCM in a triplex tube heat exchanger with finsEnergy and Buildings, 2014
- Enhance heat transfer for PCM melting in triplex tube with internal–external finsEnergy Conversion and Management, 2013
- Thermal stability of phase change materials used in latent heat energy storage systems: A reviewRenewable and Sustainable Energy Reviews, 2013
- Thermal Energy Storage2012
- Numerical simulation on phase-change thermal storage/release in a plate-fin unitApplied Thermal Engineering, 2011