The Influence of Sensor Size on Acoustic Emission Waveforms—A Numerical Study
Open Access
- 25 January 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (2) , 168
Abstract
The performance of Acoustic Emission technique is governed by the measuring efficiency of the piezoelectric sensors usually mounted on the structure surface. In the case of damage of bulk materials or plates, the sensors receive the acoustic waveforms of which the frequency and shape are correlated to the damage mode. This numerical study measures the waveforms received by point, medium and large size sensors and evaluates the effect of sensor size on the acoustic emission signals. Simulations are the only way to quantify the effect of sensor size ensuring that the frequency response of the different sensors is uniform. The cases of horizontal (on the same surface), vertical and diagonal excitation are numerically simulated, and the corresponding elastic wave displacement is measured for different sizes of sensors. It is shown that large size sensors significantly affect the wave magnitude and content in both time and frequency domains and especially in the case of surface wave excitation. The coherence between the original and received waveform is quantified and the numerical findings are experimentally supported. It is concluded that sensors with a size larger than half the size of the excitation wavelength start to seriously influence the accuracy of the AE waveform.Keywords
This publication has 23 references indexed in Scilit:
- Assessment of Acoustic Emission localization accuracy on damaged and healed concreteConstruction and Building Materials, 2016
- Correlation of Plastic Strain Energy and Acoustic Emission Energy in Reinforced Concrete StructuresApplied Sciences, 2016
- Round-robin tests on damage evaluation of concrete based on the concept of acoustic emission ratesMaterials and Structures, 2015
- Modeling of Acoustic Emission Signal Propagation in WaveguidesSensors, 2015
- Bending fracture of textile reinforced cement laminates monitored by acoustic emission: Influence of aspect ratioConstruction and Building Materials, 2014
- Temporal and spatial evaluation of grout failure process with PC cable breakage by means of acoustic emissionConstruction and Building Materials, 2013
- Damage classification in reinforced concrete beam by acoustic emission signal analysisConstruction and Building Materials, 2013
- A probabilistic approach for damage identification and crack mode classification in reinforced concrete structuresJournal of Intelligent Material Systems and Structures, 2013
- Reliable onset time determination and source location of acoustic emissions in concrete structuresCement and Concrete Composites, 2012
- Acoustic Emission Sensor Calibration for Absolute Source MeasurementsJournal of Nondestructive Evaluation, 2012