Energy Loss and Radial Force Variation Caused by Impeller Trimming in a Double-Suction Centrifugal Pump
Open Access
Abstract
Impeller trimming is an economical method for broadening the range of application of a given pump, but it can destroy operational stability and efficiency. In this study, entropy production theory was utilized to analyze the variation of energy loss caused by impeller trimming based on computational fluid dynamics. Experiments and numerical simulations were conducted to investigate the energy loss and fluid-induced radial forces. The pump’s performance seriously deteriorated after impeller trimming, especially under overload conditions. Energy loss in the volute decreased after trimming under part-load conditions but increased under overload conditions, and this phenomenon made the pump head unable to be accurately predicted by empirical equations. With the help of entropy production theory, high-energy dissipation regions were mainly located in the volute discharge diffuser under overload conditions because of the flow separation and the mixing of the main flow and the stalled fluid. The increased incidence angle at the volute’s tongue after impeller trimming resulted in more serious flow separation and higher energy loss. Furthermore, the radial forces and their fluctuation amplitudes decreased under all the investigated conditions. The horizontal components of the radial forces in all cases were much higher than the vertical components.Keywords
Funding Information
- National Natural Science Foundation of China (51879121)
- Natural Science Foundation of Jiangsu Province (BK20190851)
- Jiangsu Provincial Key Research and Development Program (BE2019009-1)
This publication has 24 references indexed in Scilit:
- Numerical investigation of impeller trimming effect on performance of an axial flow fanEnergy, 2014
- Effects of impeller trimming influencing pump as turbineComputers & Fluids, 2012
- Internal Flow Losses: A Fresh Look at Old ConceptsJournal of Fluids Engineering, 2011
- Improving centrifugal pump efficiency by impeller trimmingDesalination, 2009
- Direct and indirect methods of calculating entropy generation rates in turbulent convective heat transfer problemsHeat and Mass Transfer, 2006
- Steady and Unsteady Radial Forces for a Centrifugal Pump With Impeller to Tongue Gap VariationJournal of Fluids Engineering, 2005
- Entropy production calculation for turbulent shear flows and their implementation in cfd codesInternational Journal of Heat and Fluid Flow, 2005
- Local entropy production in turbulent shear flows: a high-Reynolds number model with wall functionsInternational Journal of Heat and Mass Transfer, 2004
- An Experimental Study on the Fluid Forces Induced by Rotor‐Stator Interaction in a Centrifugal PumpInternational Journal of Rotating Machinery, 2003
- Relationship Between Unsteady Flow, Pressure Fluctuations, and Noise in a Centrifugal Pump—Part B: Effects of Blade-Tongue InteractionsJournal of Fluids Engineering, 1995