Abstract
In this study, laser powder bed fusion (LPBF) technology was used to print TA15 titanium alloy powder. Formed specimens with high density (99.72%) and low surface roughness (Sa=4.195 μm) were successfully printed under optimal printing process parameters. The group of TA15 specimen phases was investigated and analyzed for micromorphology, and subsequently different heat treatments were used to enhance the overall mechanical properties of the titanium alloy. The formed specimens were internally composed mainly of acicular α' martensite structure, exhibiting high tensile strength and low toughness. After heat treatments at different annealing temperatures (820 °C, 930 °C, and 1020 °C) and holding times (1 h, 2 h, and 4 h), the microscopic of the sample changed significantly. The fine α' martensitic structure transforms into mixtures of α and β to varying degrees, resulting in a decrease in tensile strength and yield strength, and a significant increase in elongation. After holding at 820 °C for 2 h, the specimens showed the best overall mechanical properties with a tensile strength of 1103.5 MPa and elongation of 13.7%, and the fractures exhibited ductile fracture characteristics.