Water-Based Microchannel and Galinstan-Based Minichannel Cooling Beyond 1 kW/cm $^{2}$ Heat Flux
Authors:
- 3 June 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 5 (6) , 762-770
Abstract
Microchannel heat sinks are a relevant thermal management technology because the combination of surface area enhancement and small length scales results in low wall-to-bulk temperature differences. Previously, a thermal resistance of 0.09°C/W was achieved when a heat flux of 790 W/cm 2 was imposed on a 1 cm × 1 cm footprint portion of a 400-μm-thick Si substrate utilizing single-phase water-based microchannel cooling and a 214 kPa pressure difference to drive the flow. Galinstan, a gallium, indium, and tin eutectic, may be utilized for single-phase liquid metal cooling of microelectronics due to its subambient melting temperature and high thermal conductivity. This paper describes the fabrication and assembly of water-based microchannel and Galinstan-based minichannel heat sinks and the flow sheets utilized to characterize them under the aforementioned constraints. The prefix mini rather than micro is used to describe Galinstan-based heat sinks because optimal channel widths are hundreds as opposed to tens of micrometers. The aforementioned thermal resistance of 0.09 °C was experimentally reproduced. Unprecedentedly low thermal resistance and high heat flux in single-phase water-based microchannel cooling, i.e., 0.071°C/W and 1003 W/cm 2 , respectively, were achieved. The first experimental data on Galinstan-based minichannel heat sinks are also reported. A thermal resistance as low as 0.077°C/W was achieved at a heat flux of 1214 W/cm 2 and a maximum heat flux of 1504 W/cm 2 was reached.Keywords
Funding Information
- Defense Advanced Research Projects Agency (W31P4Q-11-1-0011)
This publication has 8 references indexed in Scilit:
- On the Potential of Galinstan-Based Minichannel and Minigap CoolingIEEE Transactions on Components, Packaging and Manufacturing Technology, 2013
- A compliant thermal spreader with internal liquid metal cooling channels2010
- Blasius: A life in research and educationExperiments in Fluids, 2003
- Heat sink optimization with application to microchannelsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1992
- High-performance heat sinking for VLSIIEEE Electron Device Letters, 1981
- A convenient correlation for heat transfer to constant and variable property fluids in turbulent pipe flowInternational Journal of Heat and Mass Transfer, 1975
- Incompressible Laminar Flow in the Entrance Region of a Rectangular DuctJournal of Applied Mechanics, 1970
- Low Reynolds number developing flowsAIChE Journal, 1969