Modelling Influence on Bending Behaviour Simulation of the Poly(Lactic Acid) Structures, 3D Printed
Open Access
Abstract
The paper presents the influence of the loading modelling on the simulation process results of the bending behaviour for 3D printed structures. The study is done on structures having different geometries of the cross section, and the type of structure is bar or tube. The materials used for 3D printing are poly(lactic) acid and poly(lactic acid) mixed with glass fibres. The simulation was carried out both based on a simple modelling (schematization) of the bending loading and a complex one. The complex modelling reproduces the bending of 3D printed structures more accurately but is also more time-consuming for the computer-aided design stage. Analysis of the study results shows that in terms of the Von Mises stresses determined by simulation, they are in line with those of the tests but with a slight advantage for the complex modelling compared to the simple one. In terms of deformations, the simulation introduces errors compared to the test results, but the source of the errors is the high elasticity of some 3D printed structures. The study also shows that the high elasticity is due to both the shape of the structure cross section and its arrangement during the bending test.Keywords
Funding Information
- University Transilvania of Brasov
This publication has 16 references indexed in Scilit:
- Comparison between the Test and Simulation Results for PLA Structures 3D Printed, Bending StressedMolecules, 2021
- A Finite Element Method to Predict the Mechanical Behavior of a Pre-Structured Material Manufactured by Fused Filament Fabrication in 3D PrintingApplied Sciences, 2021
- Elastic Asymmetry of PLA Material in FDM-Printed Parts: Considerations Concerning Experimental Characterisation for Use in Numerical SimulationsMaterials, 2019
- Novel mechanical models of tensile strength and elastic property of FDM AM PLA materials: Experimental and theoretical analysesMaterials & Design, 2019
- 3D printing assisted finite element analysis for optimising the manufacturing parameters of a lumbar fusion cageMaterials & Design, 2019
- Effect of layer thickness on flexural properties of PLA (PolyLactid Acid) by 3D printingJournal of Physics: Conference Series, 2018
- Finite element analysis of thermoplastic polymer extrusion 3D printed material for mechanical property predictionAdditive Manufacturing, 2018
- 3D Printing & Mechanical Characteristion of Polylactic Acid and Bronze Filled Polylactic Acid ComponentsIOP Conference Series: Materials Science and Engineering, 2018
- Design and optimization of prosthetic foot by using polylactic acid 3D printingJournal of Mechanical Science and Technology, 2017
- Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer2014