Cyber-Physical Systems for Epoxy Resin Insulators: Development and Study
Open Access
- 1 April 2024
- journal article
- Published by International Association of Advanced Materials in Advanced Materials Letters
- Vol. 15 (2) , 2402-1751
Abstract
The current work is performed during a research project to implement an enhanced Cyber-Physical Systems for producing electrical insulators based on thermosets. As these materials undergo a highly exothermic curing reaction during production, appropriate production control is crucial to prevent issues, such as air pockets, suboptimal surface finish, cracks, or part deformation due to non-uniform curing and residual stresses. Therefore, extensive material characterization is combined with suitable material modeling to achieve exact virtual predictions of the curing process. Differential Scanning Calorimetry (DSC) under non-isothermal (dynamic) conditions is employed to characterize the curing behavior, providing crucial insights into thermal properties and phase transitions. The reaction kinetics are modeled using model-based methods, i.e., Prout-Tompkins, and model-free kinetic models, i.e. Flynn-Wall-Ozawa and Kissinger-Akahira-Sunose. Thus, the activation energy, pre-exponential factor, and other kinetic parameters required for analysis are determined. The curing progress of the epoxy material under isothermal conditions is predicted and validated with reaction data obtained from the isothermal DSC measurements.Keywords
This publication has 15 references indexed in Scilit:
- Isothermal curing kinetics of a flame retardant epoxy resin containing DOPO investigated by DSC and rheologyThermochimica Acta, 2016
- Isoconversional Kinetics of Thermally Stimulated Processes2015
- Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEAComposites Part A: Applied Science and Manufacturing, 2013
- Kinetic study of the novolac resin curing process using model fitting and model-free methodsThermochimica Acta, 2011
- ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis dataThermochimica Acta, 2011
- Cure characterization of soybean oil—Styrene—Divinylbenzene thermosetting copolymersJournal of Applied Polymer Science, 2009
- Techniques used for determining cure kinetics of rubber compoundsEuropean Polymer Journal, 2007
- Epoxy-silicate nanocomposites: Cure monitoring and characterizationMaterials Science and Engineering: A, 2007
- A study of cure kinetics by the use of dynamic differential scanning calorimetryComposites Science and Technology, 2002
- Model-free and model-fitting approaches to kinetic analysis of isothermal and nonisothermal dataThermochimica Acta, 1999