Abstract
This article presents the design and benchmarking of cryogenic bulk-FETs using an experimentally calibrated TCAD framework that integrates 2-D electrostatics and interface-trap effects from ${T} =2$ to 300 K. For a 28-nm node device, carrier transport is predominantly ballistic at ${T} =2$ K and becomes quasi-ballistic as temperature increases. At cryogenic temperatures, higher interface-trap densities increase the effective threshold voltage and suppress subthreshold conduction. However, when the on-state bias is adjusted to account for the trap-induced ${V}_{t}$ shift, interface traps are found to worsen ${I}_{\textsc{on}}/{I}_{\textsc{off}}$ along with degrading the subthreshold swing (SS) and reducing mobility across all temperatures. The spatial standard deviation $\sigma $ of the trap distribution modulates these behaviors: highly localized traps ( $\sigma \sim {1}$ –2 nm) exacerbate short-channel effects (SCEs), whereas broader, nearly uniform distributions ( $\sigma \ge {50}$ nm) elevate the entire barrier and suppress SCEs until saturation as $\sigma \to {L}_{g}$ . The TCAD predictions closely match experimental data at 4.2, 77, and 300 K, providing design guidelines to optimize ${I}_{\textsc{on}}/{I}_{\textsc{off}}$ , SS, mobility, and DIBL for cryogenic CMOS technology nodes.
Funding Information
  • NSF National Nanotechnology Coordinated Infrastructure (ECCS2025227)

This publication has 43 references indexed in Scilit: