Assessment of Charge Initiation Techniques Effect on Blast Fragmentation and Environmental Safety: An Application of WipFrag Software
Authors:
- Blessing Olamide TaiwoBTBlessing Olamide Taiwo
- Yewuhalashet FisshaYewuhalashet Fissha
- Thomas PalangioTPThomas Palangio
- Andrew PalangioAPAndrew Palangio
- Hajime IkedaHIHajime Ikeda
- N.Rao CheepurupalliNCN.Rao Cheepurupalli
- Naseer Muhammad KhanNKNaseer Muhammad Khan
- Adams Abiodun AkinlabiAAAdams Abiodun Akinlabi
- Oluwaseun Victor FamobuwaOFOluwaseun Victor Famobuwa
- Joshua Oluwaseun FaluyiJFJoshua Oluwaseun Faluyi
- Youhei KawamuraYKYouhei Kawamura
Preprint
- 8 June 2023
- preprint
- Published by MDPI AG in Preprints.org
Abstract
Blast charge initiation procedures have a significant impact on both mining safety and production rates. In this study, the inventory benefit of an electric initiation system was investigated to assess its influence on both fragmentation and blast-induced damages. The Wipfrag software's was used to examine the size distribution and productivity of 12 small-scale blasts initiated by both non-electric and electric detonators. All blast rounds was initiated with plain type of electric and NONEL detonators. The average burden, spacing, stemming length, and charge weight were, respectively, 0.85 m, 1.10 m, 0.66m, and 1.1kg. The results showed that the mesh through which 80% of the blast fragments will pass for the electric blast is smaller than the mesh through which the material products from the NONEL blast will pass. The results also demonstrate that the generated blast-induced ground vibration (PPV) from all blast rounds for electric blast varies from 0.4–1.2 mm/s and 80–105dB, while that for non-electric blast ranges from 0.05–0.2mm/s and 72–95dB. As a result, the electric blast initiation technique was found to produce good fragmentation, with a higher percentage of optimum fragment sizes on spec than non-electrically initiated blasts.Keywords
All Related Versions
- Version 1, 2023-06-08, Preprints
- Published version: Mining, 3 (3), 532.
This publication has 24 references indexed in Scilit:
- Minimization of Blast-Induced Hazards and Efficient Utilization of Blast Energy by Implementing a Novel Stemming Plug System for Eco-Friendly Blasting in Open Pit MinesNatural Resources Research, 2022
- A review of the influence of blast fragmentation on downstream processing of metal oresMinerals Engineering, 2022
- ‘Formalization bubbles’: A blueprint for sustainable artisanal and small-scale mining (ASM) in sub-Saharan AfricaThe Extractive Industries and Society, 2020
- Determination of blast-induced ground vibration equations for rocks using mechanical and geological propertiesJournal of Rock Mechanics and Geotechnical Engineering, 2016
- Simultaneous investigation of blast induced ground vibration and airblast effects on safety level of structures and human in surface blastingInternational Journal of Mining Science and Technology, 2014
- Environmental impact of blasting at Drenovac limestone quarry (Serbia)Environmental Earth Sciences, 2014
- Origin of gem corundum in calcite marble: The Revelstoke occurrence in the Canadian Cordillera of British ColumbiaLithos, 2014
- Prediction of ground vibration level induced by blasting at different rock unitsInternational Journal of Rock Mechanics and Mining Sciences, 2011
- Theory and Practice of Air-Deck Blasting in Mines and Surface Excavations: A ReviewGeotechnical and Geological Engineering, 2011
- Environmental impacts of bench blasting at Hisarcik Boron open pit mine in TurkeyEnvironmental Geology, 2006