Influence of Material Microstructures in Micromilling of Ti6Al4V Alloy
Open Access
- 24 September 2013
- Vol. 6 (9) , 4268-4283
Abstract
In the most recent decades the introduction of unconventional machining processes allowed the development of micromachining techniques. In this work, the influence of material microstructures on the micromilling process was investigated. Ti6Al4V alloy was selected as workpiece material since it is a very common material for micro applications and because its duplex microstructure can be easily changed by proper thermal treatments. Four different microstructures (namely bimodal, fully equiaxed, fully lamellar and mill annealed) were obtained through recrystallization annealing treatments carried out at different times and temperatures. The mechanical properties of the samples were assessed by microhardness measurements. Nano-indentations were also performed on single grains to understand how the different hardness of phases and structures present in the Ti6Al4V alloy can affect the micromilling process. Microchannels using two flute flat end mills with a diameter equal to 200 µm were realized on the treated samples. Two different feed-per-tooth values were used during the tests. Cutting force, channel shape and burr dimension were investigated. Morphological and energy dispersive spectroscopy (EDS) analyses were performed on tools by means of a scanning electron microscope (SEM): in this way the phenomena mainly influencing the tool status were also identified. Lower cutting forces and reduced tool wear were observed when working fully lamellar microstructures compared to the other ones.Keywords
This publication has 24 references indexed in Scilit:
- Biomedical production of implants by additive electro-chemical and physical processesCIRP Annals, 2012
- Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace applicationCIRP Annals, 2010
- Folding assembly of micro-actuatorsCIRP Annals, 2008
- Size Effects on Surface Generation in Micro Milling of Hardened Tool SteelCIRP Annals, 2006
- Recent Advances in Mechanical MicromachiningCIRP Annals, 2006
- Micro EngineeringCIRP Annals, 2003
- Automation of the Powder-Injection-Moulding Process for Micro-Mechanical PartsCIRP Annals, 2003
- Laser Machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photonsCIRP Annals, 2002
- State of the Art of MicromachiningCIRP Annals, 2000
- Current Status in, and Future Trends of, Ultraprecision Machining and Ultrafine Materials ProcessingCIRP Annals, 1983