Comparative investigation on wear behavior and self-sharpening phenomenon of polycrystalline cubic boron nitride and monocrystalline cubic boron nitride grains in high-speed grinding
Authors:
- 5 December 2014
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 230 (4) , 710-721
Abstract
High-speed grinding experiments were conducted on a nickel-based superalloy Inconel718 with the monolayer brazed wheel containing monocrystalline cubic boron nitride grains and polycrystalline cubic boron nitride grains. Comparative investigation on the wear behavior and self-sharpening phenomenon of polycrystalline cubic boron nitride and monocrystalline cubic boron nitride grains was carried out based on the fractal analysis. The results obtained indicate that the wear process of the monocrystalline cubic boron nitride grain cutting edges is, in order, attritious wear → large fracture → micro fracture → large fracture → attritious wear, while that of the polycrystalline cubic boron nitride grain cutting edges is micro fracture → attritious wear → micro fracture. Micro fracture of polycrystalline cubic boron nitride grain occurs easily in the particular zone where large impact load is formed due to the first contact between the grain cutting edges and the workpiece material. The fractal dimension of monocrystalline cubic boron nitride wheel is 2.040–2.047, while that of the polycrystalline cubic boron nitride wheel is 2.049–2.054, which indicates that the polycrystalline cubic boron nitride grain cutting edges are finer than that of the monocrystalline cubic boron nitride counterparts. Compared to monocrystalline cubic boron nitride grains, better performance, that is, smaller radial wheel wear, lower grinding force and forces ratio, is obtained for polycrystalline cubic boron nitride grains due to micro fracture behavior and self-sharpening phenomenon in high-speed grinding.Keywords
This publication has 36 references indexed in Scilit:
- A New Model for Grinding Force Prediction and AnalysisInternational Journal of Machine Tools and Manufacture, 2010
- An experimental investigation of temperature in high speed deep grinding of partially stabilized zirconiaInternational Journal of Machine Tools and Manufacture, 2008
- 3D graphical evaluation of micron-scale protrusion topography of diamond grinding wheelInternational Journal of Machine Tools and Manufacture, 2008
- Modelling of specific energy requirement during high-efficiency deep grindingInternational Journal of Machine Tools and Manufacture, 2008
- Fractal Analysis of Grain Cutting Edge Wear in Superabrasive GrindingJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2008
- Wear Characteristics of Vitrified cBN Grinding WheelsJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2008
- Wear of diamond grinding wheels and material removal rate of silicon nitrides under different machining conditionsMaterials Letters, 2007
- Study of the ground workpiece surface topography in high-speed precision grinding using a scanning tunneling microscopyJournal of Materials Processing Technology, 2003
- Research into the application of fractal geometry in characterising machined surfacesInternational Journal of Machine Tools and Manufacture, 2001
- Research on the fractal of surface topography of grindingInternational Journal of Machine Tools and Manufacture, 2001