A Novel Method of Measuring Moisture Content Distribution in Timber During Drying Using CT Scanning and Image Processing Techniques
- 1 March 2012
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 30 (3) , 256-262
Abstract
A new method for the nondestructive measurement of moisture content (MC) distribution in timber during drying was developed using X-ray computed tomography (CT) scanning and image processing techniques. The deformed cross section in the CT images due to shrinkage was corrected with the image registration, and the shrinkage was measured by digital image correlation analysis. The pixel-wise MC distributions during drying were measured and visualized successfully. The total timber MC estimated from the MC values of each pixel were strongly correlated with those measured by calculation without geometrical transformation of CT images. The coefficient of determination (R 2) and the standard error of prediction (SEP) were 0.99 and 0.18%, respectively, within the MC range of 19.2–47.3%. In addition, the measured shrinkage distribution during drying was in accordance with the diamonding deformation observed. The results suggest that CT scanning combined with image processing techniques is an effective tool for nondestructive assessment of MC distribution during drying.Keywords
This publication has 19 references indexed in Scilit:
- Optical Measurement of Deformations in Drying LumberDrying Technology, 2011
- Shrinkage vector determination of dental composite by μCT imagesComposites Science and Technology, 2010
- Full Three-Dimensional Strain Measurements on Wood Exposed to Three-Point Bending: Analysis by Use of Digital Volume Correlation Applied to Synchrotron Radiation Micro-Computed Tomography Image DataStrain, 2010
- Two-dimensional digital image correlation for in-plane displacement and strain measurement: a reviewMeasurement Science and Technology, 2009
- The Dynamic of Shrinkage/Moisture Content Behavior Determined During Drying of Microsamples for Different Kinds of WoodDrying Technology, 2008
- Non-destructive Measurement of Moisture Distribution in Wood during Drying Using Digital X-ray MicroscopyDrying Technology, 2008
- Moisture Distribution Changes and Wetwood Behavior in Subalpine Fir Wood during Drying Using High X-Ray Energy Industrial CT ScannerDrying Technology, 2007
- An Analysis of the Swelling Behavior of Various Woods Using an Optical Microscope and a Digital Image Correlation Method (DIC)Journal of the Society of Materials Science, Japan, 2001
- The Effect of Vertical Air Gaps, Air Velocities and Fan Revolutions on the Drying Characteristics of Thick Pacific Coast Hemlock LumberHolzforschung, 1997
- NONDESTRUCTIVE MEASUREMENT OF MOISTURE DIFFUSION COEFFICIENT IN WOOD DRYINGDrying Technology, 1992