Analysis and Reduction of DC Winding Induced Voltage Pulsation in Five-Phase Non-Overlapped Stator Wound Field Flux Switching Machine
Open Access
- 28 July 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 105696-105710
Abstract
DC winding induced voltage pulsation in Wound field flux switching (WFFS) machine is the main cause of the current ripples in DC winding. It may also deteriorates the DC power source and enhances the challenging issues to the control performances of the machine. Hence, reduction of this pulsation is very considerable parameter to analyze in WFFS machine's analysis. In this paper, DC winding induced voltage for five phase non overlapping stator WFFS machine is analyzed and reduced through various techniques. Three techniques i.e. rotor pole arc optimization, chamfering and rotor step skewing are analyzed and optimized to reduce the DC winding induced voltage. For optimization, krigging method based on genetic algorithm (GA) is performed due to compatibility with non-linear data and then results are verified by finite element (FE) analysis. By applying the chamfering and rotor pole arc optimization, 49.58% and 28.45% reduction in the peak to peak value of DC winding induced voltage pulsation is achieved and electromagnetic torque is maintained at 97.82% and 100% respectively while by applying the rotor skewing, 33.29% reduction in DC winding induced voltage pulsation is achieved and the torque is maintained at 98.37% for the five phase 10S-11P WFFS machine.Keywords
Funding Information
- Higher Education Commission of Pakistan through the Project “Indigenous Ph.D. Fellowship For 5000 Scholars (Phase-II)” (417-31756-2EG4-019 (50038929))
This publication has 45 references indexed in Scilit:
- Investigation of Nonoverlapping Stator Wound-Field Synchronous MachinesIEEE Transactions on Energy Conversion, 2015
- Novel Stator Electrically Field Excited Synchronous Machines Without Rare-Earth MagnetIEEE Transactions on Magnetics, 2015
- Analysis of Air-Gap Field Modulation and Magnetic Gearing Effects in Switched Flux Permanent Magnet MachinesIEEE Transactions on Magnetics, 2015
- Reduced Rare-Earth Flux-Switching Machines for Traction ApplicationsIEEE Transactions on Industry Applications, 2015
- Analysis of Two Novel Five-Phase Hybrid-Excitation Flux-Switching Machines for Electric VehiclesIEEE Transactions on Magnetics, 2014
- Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An OverviewIEEE Transactions on Industrial Electronics, 2014
- Cogging torque suppression in a permanent-magnet flux-switching integrated-starter-generatorIET Electric Power Applications, 2010
- Optimization of Permanent Magnet Surface Shapes of Electric Motors for Minimization of Cogging Torque Using FEMIEEE Transactions on Magnetics, 2010
- A Switched Reluctance Machine-Based Starter/Alternator for More Electric CarsIEEE Transactions on Energy Conversion, 2004
- Design techniques for reducing the cogging torque in surface-mounted PM motorsIEEE Transactions on Industry Applications, 2002