An automated routing methodology to enable direct rainfall in high resolution shallow water models
- 18 August 2012
- journal article
- scientific briefing
- Published by Wiley in Hydrological Processes
- Vol. 27 (3) , 467-476
Abstract
Recent high profile flood events have highlighted the need for hydraulic models capable of simulating pluvial flooding in urban areas. This paper presents a constant velocity rainfall routing scheme that provides this ability within the LISFLOOD‐FP hydraulic modelling code. The scheme operates in place of the shallow water equations within cells where the water depth is below a user‐defined threshold, enabling rainfall‐derived water to be moved from elevated features such as buildings or curbstones without causing instabilities in the solution whilst also yielding a reduction in the overall computational cost of the simulation. Benchmarking against commercial modelling packages using a pluvial and point‐source test case demonstrates that the scheme does not impede the ability of LISFLOOD‐FP to match both predicted depths and velocities of full shallow water models. The stability of the scheme in conditions unsuitable for traditional two‐dimensional hydraulic models is then demonstrated using a pluvial test case over a complex urban digital elevation model containing buildings. Deterministic single‐parameter sensitivity analyses undertaken using this test case show limited sensitivity of predicted water depths to both the chosen routing speed within a physically plausible range and values of the depth threshold parameter below 10 mm. Local instabilities can occur in the solution if the depth threshold is >10 mm, but such values are not required even when simulating extreme rainfall rates. The scheme yields a reduction in model runtime of ~25% due to the reduced number of cells for which the hydrodynamic equations have to be solved. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 28 references indexed in Scilit:
- Benchmarking urban flood models of varying complexity and scale using high resolution terrestrial LiDAR dataPhysics and Chemistry of the Earth, Parts A/B/C, 2011
- A simple inertial formulation of the shallow water equations for efficient two-dimensional flood inundation modellingJournal of Hydrology, 2010
- Evaluating the effect of scale in flood inundation modelling in urban environmentsHydrological Processes, 2008
- Flood risk analyses—how detailed do we need to be?Natural Hazards, 2008
- A methodology for regional-scale flood risk assessmentProceedings of the Institution of Civil Engineers - Water Management, 2008
- Drainage efficiency in urban areas: a case studyHydrological Processes, 2005
- A methodology for national-scale flood risk assessmentProceedings of the Institution of Civil Engineers - Water and Maritime Engineering, 2003
- A dynamic TOPMODELHydrological Processes, 2001
- Estimating the mean speed of laminar overland flow using dye injection‐uncertainty on rough surfacesEarth Surface Processes and Landforms, 2001
- A physically based, variable contributing area model of basin hydrology / Un modèle à base physique de zone d'appel variable de l'hydrologie du bassin versantHydrological Sciences Bulletin, 1979