Optimization of a three-electrode system for electrochemical reduction–oxidation of 4-chlorophenol with response surface methodology
- 18 December 2015
- journal article
- research article
- Published by Taylor & Francis in Toxicological & Environmental Chemistry
- Vol. 98 (3-4) , 327-344
Abstract
Chlorophenols are ubiquitous and resistant pollutants to traditional treatment that produce detrimental effects on humans. The aim of this investigation was to examine the Pd/graphene electrocatalytic reduction–oxidation process of 4-chlorophenol using a three-electrode system composed of two Pd/graphene gas-diffusion cathodes and one Ti/IrO2/RuO2 anode. By means of a single factor experiment, this study determined the influence of factors such as current density, electrolyte concentration, pH, and aerated condition. Optimal conditions were obtained by response surface methodology. Results showed that 4-chlorophenol degradation increased with rise in current density, but decreased with elevation in electrolyte concentration. 4-Chorphenol degradation was unfavorable to the redox reaction in per-acid or alkaline solution. A small quantity of 4-chlorophenol and other aromatic compounds remained when bubbling hydrogen alone. Feeding oxygen subsequently further oxidized residual 4-chlorophenol and the related compounds. The optimal variables were as follows: current density, 45 mA cm−2; Na2SO4 electrolyte concentration, 0.03 mol L−1; initial pH, 7; electrolysis time, 120 min (60 min for bubbling hydrogen and then 60 min for air). Under these conditions, the degradation efficiencies of 4-chlorophenol were 94.9% (cathodic chamber 1), 95% (cathodic chamber 2), and 94.7% (anodic chamber).Keywords
Funding Information
- National Natural Science Foundation of China (51278053, 21373032)
- Kochi University of Technology (230300150)
- China Scholarship Council (201308110248, 201406045008)
- Fundamental Research Funds for Central Universities (TD2013-2)
This publication has 49 references indexed in Scilit:
- Electrocatalytic dechlorination of volatile organic compounds at a copper cathode. Part I: PolychloromethanesApplied Catalysis B: Environment and Energy, 2012
- Rational synthesis of 1,3-diolein by enzymatic esterificationJournal of Biotechnology, 2012
- Electrocatalytic properties of transition metals toward reductive dechlorination of polychloroethanesElectrochimica Acta, 2012
- Production, characterization and antioxidant activity of exopolysaccharides from submerged culture of Morchella crassipesBioprocess and Biosystems Engineering, 2012
- Negative-pressure cavitation extraction of cajaninstilbene acid and pinostrobin from pigeon pea [Cajanus cajan (L.) Millsp.] leaves and evaluation of antioxidant activityFood Chemistry, 2011
- Evaluation of electro-oxidation of biologically treated landfill leachate using response surface methodologyJournal of Hazardous Materials, 2011
- Solar photoelectro-Fenton degradation of paracetamol using a flow plant with a Pt/air-diffusion cell coupled with a compound parabolic collector: Process optimization by response surface methodologyApplied Catalysis B: Environment and Energy, 2011
- Complete dechlorination of pentachlorophenol by a heterogeneous SiO2–Fe–porphyrin catalystApplied Catalysis B: Environment and Energy, 2010
- Cold Incineration of Chlorophenols in Aqueous Solution by Advanced Electrochemical Process Electro-Fenton. Effect of Number and Position of Chlorine Atoms on the Degradation KineticsThe Journal of Physical Chemistry A, 2009
- Degradation of chlorophenols by means of advanced oxidation processes: a general reviewApplied Catalysis B: Environment and Energy, 2004