The HOTFIRE Homogeneous GDI and Fully Variable Valve Train Project - An Initial Report
Authors:
- 3 April 2006
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
There is a great deal of interest in new technologies to assist in reducing the CO2 output of passenger vehicles, as part of the drive to meet the limits agreed by the EU and the European Automobile Manufacturer's Association ACEA, itself a result of the Kyoto Protocol. For the internal combustion engine, the most promising of these include gasoline direct injection, downsizing and fully variable valve trains. While new types of spray-guided gasoline direct injection (GDI) combustion systems are finally set to yield the level of fuel consumption improvement which was originally promised for the so-called ‘first generation’ wall- and air-guided types of GDI, injectors for spray-guided combustion systems are not yet in production to help justify the added complication and cost of the NOx trap necessary with a stratified combustion concept. Conversely, hardware suitable for homogeneous combustion systems is available now and this approach offers the advantage that simple three-way catalysis only needs to be used for exhaust gas aftertreatment. This in turn means that homogeneous GDI is a technology applicable to a world-wide market, because NOx traps are susceptible to poisoning by sulphur, such as is to be found in high concentrations in US gasolines. Advanced mechanically-variable valve trains are in production now, which considerably reduce pumping losses in the 4-stroke engine over the conventional ‘variable density’ type of throttling. Fully variable valve trains are being developed to production, too. These technologies allow throttling loss to be addressed directly rather than by the more circuitous route of stratified charge combustion. While homogeneous combustion systems with load control by valve event may not offer the ultimate thermodynamic benefits of stratified charge, the fuel consumption improvement possibilities are still considerable, relative to a state-of-the-art port fuel injection engine. The present work discusses the start of the HOTFIRE consortium project which is a three-year programme to investigate the strong interactions and synergies between homogeneous GDI and fully variable valve train systems. Initial results from the consortium's high-speed optical access engine, fitted with a research fully variable valve train system, are presented. Work responsibilities within the project are discussed together with the potential of the assembled test equipment to look at the interaction between variable valve trains and spray-guided GDI systems in the future.Keywords
This publication has 16 references indexed in Scilit:
- Active valvetrain for homogeneous charge compression ignitionInternational Journal of Engine Research, 2005
- Development of a Two-Stroke/Four-Stroke Switching Gasoline Engine - The 2/4SIGHT ConceptSAE International Journal of Advances and Current Practices in Mobility, 2005
- Boosting and Direct Injection -Synergies for Future Gasoline EnginesSAE International Journal of Advances and Current Practices in Mobility, 2005
- A Study of Center and Side Injection in Spray Guided DISI ConceptSAE International Journal of Advances and Current Practices in Mobility, 2005
- Concepts for improved fuel economy from gasoline enginesInternational Journal of Engine Research, 2005
- Benzin-Direkteinspritzsystem mit Piezo-Injektor für strahlgeführte BrennverfahrenMTZ - Motortechnische Zeitschrift, 2004
- New Operating Strategies Afforded by Fully Variable Valve TrainsSAE International Journal of Advances and Current Practices in Mobility, 2004
- Design and Control of a Two-stage Electro-hydraulic Valve Actuation SystemSAE International Journal of Advances and Current Practices in Mobility, 2004
- Using Camless Valvetrain for Air Hybrid OptimizationSAE International Journal of Advances and Current Practices in Mobility, 2003
- Flame and Combustion1995