Thermal Characteristics of Paraffin/Expanded Perlite Composite for Latent Heat Thermal Energy Storage
- 3 April 2009
- journal article
- research article
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 31 (10) , 814-823
Abstract
This study focuses on the preparation and thermal properties of paraffin/expanded perlite composite as novel form-stable phase change material for latent heat thermal energy storage by vacuum impregnation method. The paraffin could be absorbed in pores of expanded perlite as much as 55 wt% without melted phase change material seepage from the composite and this mixture was described as form-stable composite phase change material. The melting and freezing temperatures and latent heats of form-stable composite phase change material were measured using differential scanning calorimetry analysis. The thermal cycling test indicated that the form-stable composite phase change material had good thermal reliability in terms of the changes in thermal properties after 5,000 thermal cycling. Thermal conductivity of the form-stable composite phase change material was increased by about 46% by adding 5 wt% expanded graphite. The results indicated that the prepared form-stable paraffin/expanded perlite/expanded graphite composite phase change material has a great potential for latent heat thermal energy storage systems solar passive heating purposes due to suitable phase change temperature, high latent heat capacity, good thermal reliability, and thermal conductivity.Keywords
This publication has 17 references indexed in Scilit:
- Thermal Characteristics of Paraffin Wax for Solar Energy StorageEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2006
- Study on paraffin/expanded graphite composite phase change thermal energy storage materialEnergy Conversion and Management, 2006
- Thermal Energy Storage Performance of Fatty Acids as a Phase Change MaterialEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2006
- Fatty Acids as Phase Change Materials (PCMs) for Thermal Energy Storage: A ReviewInternational Journal of Green Energy, 2005
- Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applicationsEnergy Conversion and Management, 2003
- Accelerated thermal cycle test of acetamide, stearic acid and paraffin wax for solar thermal latent heat storage applicationsEnergy Conversion and Management, 2002
- Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage materialInternational Journal of Heat and Mass Transfer, 2001
- The Viability of Thermal Energy StorageEnergy Sources, 1999
- Characterization of Alkanes and Paraffin Waxes for Application as Phase Change Energy Storage MediumEnergy Sources, 1994
- Fatty acids and their mixtures as phase-change materials for thermal energy storageSolar Energy Materials, 1989