Distribution of Belt Anchorage Locations in the Second Row of Passenger Cars and Light Trucks
Authors:
- 8 April 2013
- journal article
- Published by SAE International in SAE International Journal of Transportation Safety
- Vol. 01 (1) , 25-31
Abstract
Seat belt anchorage locations have a strong effect on occupant protection. Federal Motor Vehicle Safety Standard (FMVSS) 210 specifies requirements for the layout of the anchorages relative to the seating reference point and seat back angle established by the SAE J826 H-point manikin. Sled testing and computational simulation has established that belt anchorage locations have a strong effect on occupant kinematics, particularly for child occupants using the belt as their primary restraint. As part of a larger study of vehicle geometry, the locations of the anchorage points in the second-row, outboard seating positions of 83 passenger cars and light trucks with a median model year of 2005 were measured. The lower anchorage locations spanned the entire range of lap belt angles permissible under FMVSS 210 and the upper anchorages (D-ring locations) were distributed widely as well. Combined with the findings from concurrent research on the effects of belt geometry, these results suggest that occupant kinematics in frontal impact can be expected to differ widely across vehicles due to differences in belt geometry.Keywords
This publication has 10 references indexed in Scilit:
- Rear Seat Restraint System Optimization for Older Children in Frontal CrashesTraffic Injury Prevention, 2013
- Effects of vehicle seat and belt geometry on belt fit for children with and without belt positioning booster seatsAccident Analysis & Prevention, 2013
- Effects of Obesity on Seat Belt FitTraffic Injury Prevention, 2012
- Development and validation of a modified Hybrid-III six-year-old dummy model for simulating submarining in motor-vehicle crashesMedical Engineering & Physics, 2011
- Measurement of the Contour and Deflection of Vehicle Seats for Comparison with the FMVSS 213 Dynamic Test BenchSAE International Journal of Advances and Current Practices in Mobility, 2011
- Development and Testing of a More Realistic Pelvis for the Hybrid III 6-Year-Old ATDTraffic Injury Prevention, 2010
- Improved Positioning Procedures for 6YO and 10YO ATDs Based on Child Occupant PosturesSAE International Journal of Advances and Current Practices in Mobility, 2006
- Comparison of Child Body Dimensions with Rear Seat GeometrySAE International Journal of Advances and Current Practices in Mobility, 2006
- Development of ATD Installation Procedures Based on Rear-Seat Occupant PosturesSAE International Journal of Advances and Current Practices in Mobility, 2005
- Assessing Submarining and Abdominal Injury Risk in the Hybrid III Family of DummiesSAE International Journal of Advances and Current Practices in Mobility, 1989