Use of Synchrotron XANES and Cr-Doped Coal to Further Confirm the Vaporization of Organically Bound Cr and the Formation of Chromium(VI) During Coal Oxy-Fuel Combustion
- 7 March 2012
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 46 (6) , 3567-3573
Abstract
Through the use of synchrotron XANES and Cr-doped brown coal, extensive efforts have been made to clarify the volatility of organically bound Cr during oxy-fuel combustion and the mode of occurrence and leachability of Cr in resulting fly ashes. As the continuation of our previous study using raw coal, the Cr-doped coal has been tested in this study to improve the signal-to-noise ratio for Cr K-edge XANES spectra, and hence the accuracy for Cr(VI) quantification. As has been confirmed, the abundant CO2 as a balance gas for oxy-firing has the potential to inhibit the decomposition of organically bound Cr, thereby favoring its retention in solid ash. It also has the potential to promote the oxidation of Cr(III) to Cr(VI) to a minor extent. Increasing the oxygen partial pressure, particularly in the coexistence of HCl in flue gas, favored the oxidation of Cr(III) into gaseous Cr(VI)-bearing species such as CrO2Cl2. Regarding the solid impurities including Na2SO4 and CaO, Na2SO4 has proven to preferentially capture the Cr(III)-bearing species at a low furnace temperature such as 600 °C. Its promoting effect on the oxidation of Cr(III) to Cr(VI), although thermodynamically available at the temperatures examined here, is negligible in a lab-scale drop tube furnace (DTF), where the particle residence time is extremely short. In contrast, CaO has proven facilitating the capture of Cr(VI)-bearing species particularly oxychloride vapors at 1000 °C, forming Ca chromate with the formulas of CaCrO4 and Ca3(CrO4)2 via a direction stabilization of Cr(VI) oxychloride vapor by CaO particle or an indirect oxidation of Cr(III) via the initial formation of Ca chromite. The fly ash collected from the combustion of Cr-doped coal alone has a lower water solubility (i.e., 58.7%) for its Cr(VI) species, due to the formation of Ba/Pb chromate and/or the incorporation of Cr(VI) vapor into a slagging phase which is water-insoluble. Adding CaO to coal increased the water-solubility of both Cr(VI) and Cr(III) by forming Ca chromite and chromate, respectively.Keywords
This publication has 27 references indexed in Scilit:
- Speciation of chromium in Australian coals and combustion productsFuel, 2012
- Synchrotron-Based XANES Speciation of Chromium in the Oxy-Fuel Fly Ash Collected from Lab-Scale Drop-Tube FurnaceEnvironmental Science & Technology, 2011
- Ash partitioning during the oxy–fuel combustion of lignite and its dependence on the recirculation of flue gas impurities (H2O, HCl and SO2)Fuel, 2011
- Experimental investigation of the combustion of bituminous coal in air and O2/CO2 mixtures: 2. Variation of the transformation behaviour of mineral matter with bulk gas compositionFuel, 2011
- Differences in reactivity of pulverised coal in air (O2/N2) and oxy-fuel (O2/CO2) conditionsFuel Processing Technology, 2009
- Toxicity and Carcinogenicity of Chromium Compounds in HumansCritical Reviews in Toxicology, 2006
- Oxy-fuel combustion technology for coal-fired power generationProgress in Energy and Combustion Science, 2005
- Mechanisms of chromium toxicity, carcinogenicity and allergenicity: Review of the literature from 1985 to 2000Human & Experimental Toxicology, 2001
- Pressurized Pulverized Fuel Combustion in Different Concentrations of Oxygen and Carbon DioxideEnergy & Fuels, 1996
- Toxic effects of chromium and its compoundsBiological Trace Element Research, 1992