Improving Light and Intermediate Load Efficiencies of Buck Converters With Planar Nonlinear Inductors and Variable On Time Control
Authors:
- 12 May 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 27 (1) , 342-353
Abstract
It has been addressed that light and intermediate load efficiencies of high-frequency buck converters in portable electronic devices are very important for extending lifetime of batteries. This paper proposes to utilize wide range, gradually changeable nonlinear inductors with variable on time control to improve light and intermediate load efficiencies. Integrated multipermeability magnetic cores are advanced to realize the nonlinear inductors. And based on the nonlinear inductors, variable on-time control scheme is proposed to reduce the frequency-dependent loss. The theoretical loss reduction is demonstrated by comparing loss of a converter employing conventional constant on-time control scheme and employing the proposed control scheme. A two-permeability nonlinear inductor prototype is fabricated. Its inductance could vary from 0.13 μH at full load to 0.66 μH at no load. The nonlinear inductor is employed in a 12 V input, 1.6 V output buck converter to evaluate its performance. With the purpose of comparison, other two commercial chip inductors are also tested in the converter. The results show the nonlinear inductor with variable on time control could effectively improve efficiencies of light and intermediate load conditions as theoretical analysis does.Keywords
This publication has 13 references indexed in Scilit:
- Hybrid Integration of a Low-Voltage, High-Current Power Supply Buck Converter With an LTCC Substrate InductorIEEE Transactions on Power Electronics, 2010
- Magnetic control of DC-DC resonant converters provides constant frequency operationElectronics Letters, 2010
- A class of coupled inductors based on LTCC technology2010
- Evaluation of LTCC capacitors and inductors in DC/DC converters2010
- High Inductance Density Low-Profile Inductor Structure for Integrated Point-of-Load Converter2009
- Internal Geometry Variation of LTCC Inductors to Improve Light-Load Efficiency of DC-DC ConvertersIEEE Transactions on Components and Packaging Technologies, 2008
- A Class of Ceramic-Based Chip Inductors for Hybrid Integration in Power SuppliesIEEE Transactions on Power Electronics, 2008
- System design of a 3D integrated non-isolated Point Of Load converter2008
- A high efficiency, soft switching DC-DC converter with adaptive current-ripple control for portable applicationsIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2006
- Improved light-load efficiency for synchronous rectifier voltage regulator moduleIEEE Transactions on Power Electronics, 2000