The Weldability of Duplex Stainless-Steel in Structural Components to Withstand Corrosive Marine Environments
Open Access
Abstract
There is still a considerable gap in the definition of the weldability of Duplex Stainless Steel (DSS). A lack of clarity that is explained by the standard specification of the maximum content of equivalent carbon that defines a “weldable” steel coupled with the fact that the alloying elements of DSS exceed this defined limit of weldability. In this paper, welding quality in an inert environment and in presence of chlorides is analyzed with the aim of defining optimum welding conditions of 2001, 2304, and 2205 DSS. The same procedure is followed for a hybrid weld between DSS 2205 and a low carbon mild steel, S275JR. As main output, this study defined the optimal welding conditions with tungsten inert gas without filler for each type of DSS weld that showed excellent anti-corrosion performance, with the exception of the DSS 2205-S275JR weld where widespread corrosion was observed. Additionally, this study established a relationship between the thermal input during welding and the content of alloying elements in defect-free joints. Furthermore, it demonstrated that an increase in ferrite content did not lead to a worse corrosion resistance, as expected after passivation.Keywords
Funding Information
- Centro para el Desarrollo Tecnológico Industrial (IPT-20111023)
This publication has 19 references indexed in Scilit:
- Effect of prolonged temperature exposure on pitting corrosion of duplex stainless steel weld jointsAin Shams Engineering Journal, 2018
- Weldability, machinability and surfacing of commercial duplex stainless steel AISI2205 for marine applications – A recent reviewJournal of Advanced Research, 2017
- Effects of Heat Input on Microstructure, Corrosion and Mechanical Characteristics of Welded Austenitic and Duplex Stainless Steels: A ReviewMetals, 2017
- Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments—A reviewJournal of Manufacturing Processes, 2017
- Effect of heat input on dissimilar welds of ultra high strength steel and duplex stainless steel: Microstructural and compositional analysisMaterials Characterization, 2017
- The impact of heat input on the strength, toughness, microhardness, microstructure and corrosion aspects of friction welded duplex stainless steel jointsJournal of Manufacturing Processes, 2015
- EFFECT OF INTERMETALLIC PHASES ON CORROSION BEHAVIOR AND MECHANICAL PROPERTIES OF DUPLEX STAINLESS STEEL AND SUPER-DUPLEX STAINLESS STEELAdvances in Science and Technology Research Journal, 2015
- Study for TIG–MIG hybrid welding processWelding in the World, 2013
- Study of hot deformation behaviour of 2205 duplex stainless steel through hot tension testsJournal of Materials Science, 2013
- Cross-section stability of lean duplex stainless steel welded I-sectionsJournal of Constructional Steel Research, 2013