SKPFM investigations of intermetallic compounds of innovative Er‐ and Zr‐containing Al–Si–Mg alloys and their influence on corrosion localization in saline solution
- 2 April 2019
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 70 (9) , 1570-1577
Abstract
The paper aims at characterizing the influence of intermetallic compounds on the corrosion localization of innovative Al–Si–Mg Er‐ and Zr‐containing casting alloys. Samples of the investigated materials were studied by means of optical and scanning electron microscope micrographs, immersion tests, and scanning Kelvin probe force microscope (SKPFM) analyses in the T6 temper. Combination of immersion tests and SKPFM analyses allowed to identify those classes of intermetallic compounds promoting localization of the corrosion process. It was found that intermetallic compounds richer in Fe were the most critical for corrosion localization; furthermore, additions of Er caused a marked decrease of the potential difference of intermetallic compounds with respect to the Al matrix and a consequent less intense microgalvanic coupling, which translates into slower corrosion kinetics. Further, Zr additions slightly increased the potential difference of intermetallic compounds with the Al matrix, promoting a faster corrosion process.Keywords
This publication has 24 references indexed in Scilit:
- Pitting corrosion of rheocast A356 aluminium alloy in 3.5wt.% NaCl solutionCorrosion Science, 2013
- Combination of AFM, SKPFM, and SIMS to Study the Corrosion Behavior of S-phase particles in AA2024-T351Journal of the Electrochemical Society, 2008
- Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425°CActa Materialia, 2008
- The Role of Intermetallic Particles in Localized Corrosion of an Aluminum Alloy Studied by SKPFM and Integrated AFM/SECMJournal of the Electrochemical Society, 2008
- Characterization of cast AlSi(Cu) alloys by scanning Kelvin probe force microscopyElectrochimica Acta, 2006
- Corrosion behaviour of different tempers of AA7075 aluminium alloyElectrochimica Acta, 2004
- Microscopic aspects of electrochemical delamination: an SKPFM studyElectrochimica Acta, 2003
- Influence of Mg Content on the Microstructure and Solid Solution Chemistry of Al-7%Si-Mg Casting Alloys During Solution TreatmentMaterials Science Forum, 2000
- Characterization of AA2024‐T3 by Scanning Kelvin Probe Force MicroscopyJournal of the Electrochemical Society, 1998
- A Compilation of Corrosion Potentials Reported for Intermetallic Phases in Aluminum AlloysJournal of the Electrochemical Society, 1995