Abstract
The aim of this study is to generate energy from the movement of a palm tree branch that has the potential to power wireless sensor nodes by means of wind energy. An experimental investigation of a piezoelectric based energy harvester on a Bismarck (Bismarckia nobilis) palm tree was performed. The branch was placed in the test section of a wind tunnel that provided the airflow speed in a controlled environment. The energy was harvested from a palm tree that was clamped at the end of the stem and induced to vibrate at ambient wind speeds. The results showed that there is a linear relationship between the wind speed and voltage generated; as the wind speed increased, the power output increased. The voltage produced under different wind speeds (2–7 m s −1 ) with various load resistors were tested to determine the maximum power output. A maximum power output of 0.157 mW was produced when using an optimal load of 1 ΩM, which corresponded to a power density of about 393 mW m −2 at airflow speed of 7 m s −1 . It was also observed that the voltage produced at various flow speeds was enough to generate high levels of power for powering small sensors.

This publication has 19 references indexed in Scilit: