Induction diffusion brazing of copper to aluminium
Authors:
- 1 February 2017
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 22 (2) , 170-175
Abstract
The aim of this research was to develop an induction diffusion brazing to obtain a sound joint between copper and aluminium. A foil interlayer was used to bond copper to aluminium at 600°C for 2 s under a bonding pressure of 9 MPa. The failure of tensile test is in the aluminium side and no failure occurs when the joint is bent to 180°. The electrical resistivity of joint is lower than that of aluminium. The interfacial intermetallic compounds layers are Cu9Al4 and CuAl2 with the total thickness of 2 μm. No voids and oxide scale are found in the joint. Heat treatment shows that induction diffusion brazing is superior to conventional flash welding to maintain electrical stability and mechanical integrity of copper to aluminium joint.Keywords
Funding Information
- State Grid Corporation of China (SGKJ[2010]14)
This publication has 16 references indexed in Scilit:
- Linear friction welding of aluminium to copperScience and Technology of Welding and Joining, 2012
- Behavior of aluminum oxide, intermetallics and voids in Cu–Al wire bondsActa Materialia, 2011
- Enhancing the Ductility of Laser-Welded Copper-Aluminum Connections by using Adapted Filler MaterialsPhysics Procedia, 2011
- Laser Beam Welding with High-Frequency Beam Oscillation: Welding of Dissimilar Materials with Brilliant Fiber LasersPhysics Procedia, 2011
- Direct welding of different metals used ultrasonic vibrationJournal of Materials Processing Technology, 2009
- Bonding process of Al/Cu dissimilar bonding with liquefaction in airWelding International, 2007
- Reliability of power connectionsJournal of Zhejiang University-SCIENCE A, 2007
- Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealingJournal of Alloys and Compounds, 2005
- Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding processJournal of Alloys and Compounds, 2001
- Intermetallic compounds at aluminum-to-copper electrical interfaces: effect of temperature and electric currentIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1994