A new bismaleimide system for resin transfer molding
Authors:
- 1 February 1997
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 18 (1) , 151-155
Abstract
A new bismaleimide (BMI) resin system, designated 4503A, suitable for resin transfer molding (RTM) has been developed. It is prepared by employing allyl methyl phenol and diallyl bisphenol A as reactive diluents for BMI. The processing properties of 4503A were investigated by time‐temperature‐viscosity curves, gel characteristics, and differential scanning calorimetry (DSC). Data show that the injection temperature of 4503A prepolymer can be as low as 75°C, while its viscosity is only 0.34Pa · s. In addition, after being maintained at 75°C for 12h, the viscosity is Tg) and a heat deflection temperature (HDT) of 266 and 232°C, respectively; properties include tensile strength of 81MPa, flexural strength of 108MPa, and G1C of 213J/m2. Other properties of a composite based on 4503A system and woven glass cloth are also discussed. Regarding short beam shear (SBS) strength, for tests at 150 and 180°C, 80 and 61% of the original room temperature (RT) strength is retained. A similar strength retention (86 and 68%) is noted for flexural properties.Keywords
This publication has 3 references indexed in Scilit:
- Semi-Interpenetrating Networks of Sulfur-Containing BismaleimidesHigh Performance Polymers, 1993
- New functionalized poly(arylene-ether ketone)s and their use as modifiers for bismaleimide resinHigh Performance Polymers, 1993
- Recent advances in polyimide compositesHigh Performance Polymers, 1993