Vibroacoustic properties of thin micro-perforated panel absorbers
Authors:
- 1 August 2012
- journal article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 132 (2) , 789-798
Abstract
This paper presents theoretical and experimental results on the influence of panel vibrations on the sound absorption properties of thin micro-perforated panel absorbers (MPPA). Measurements show that the absorption performance of thin MPPAs generates extra absorption peaks or dips that cannot be understood assuming a rigid MPPA. A theoretical model is established that accounts for structural-acoustic interaction between the micro-perforated panel and the backing cavity, assuming uniform conservative boundary conditions for the panel and separable coordinates for the cavity cross-section. This model is verified experimentally against impedance tube measurements and laser vibrometric scans of the cavity-backed panel response. It is shown analytically and experimentally that the air-frame relative velocity is a key factor that alters the input acoustic impedance of thin MPPAs. Coupled mode analysis reveals that the two first resonances of an elastic MPPA are either panel-cavity, hole-cavity, or panel-controlled resonances, depending on whether the effective air mass of the perforations is greater or lower than the first panel modal mass. A critical value of the perforation ratio is found through which the MPPA resonances experience a frequency “jump” and that determines two absorption mechanisms operating out of the transitional region.Keywords
This publication has 17 references indexed in Scilit:
- Double-Layer Microperforated Panel/Porous Absorber as Liner for Anechoic Closing of the Test Section in Wind TunnelsActa Acustica united with Acustica, 2010
- Porous Materials with Perforated Facings2009
- Sound transmission through a microperforated-panel structure with subdivided air cavitiesThe Journal of the Acoustical Society of America, 2008
- Modeling of perforated plates and screens using rigid frame porous modelsJournal of Sound and Vibration, 2007
- A numerical study of double-leaf microperforated panel absorbersApplied Acoustics, 2006
- Sound absorption of a finite flexible micro-perforated panel backed by an air cavityJournal of Sound and Vibration, 2005
- Feasibility of applying micro-perforated absorbers in acoustic window systemsApplied Acoustics, 2005
- PREDICTING THE ABSORPTION OF OPEN WEAVE TEXTILES AND MICRO-PERFORATED MEMBRANES BACKED BY AN AIR SPACEJournal of Sound and Vibration, 1999
- Potential of microperforated panel absorberThe Journal of the Acoustical Society of America, 1998
- Microperforated-Panel Wideband AbsorbersNoise Control Engineering Journal, 1987