Leaching of Copper from Waste-Printed Circuit Boards (PCBs) in Sulfate Medium Using Cupric Ion and Oxygen
Open Access
Abstract
In the present paper, the leaching of copper from printed circuit boards (PCBs) using sulfuric acid with Cu2+ and O2 is proposed. The effects of various process parameters such as agitation speed, temperature, the type and the flow rate of gas, initial Cu2+ concentration, and pulp density were investigated to examine the dissolution behavior of Cu from PCBs in 1 mol/L sulfuric acid. The kinetic studies were performed using the obtained leaching data. The leaching rate of Cu from PCBs was found to be higher on addition of Cu2+ and O2 to the leachant in comparison with the addition of O2 or both Cu2+ and N2 in the leachant. The leaching efficiency of Cu was found to be increased with increasing agitation speed, temperature, O2 flow rate, and initial Cu2+ concentration and decreasing pulp density. The 96% of Cu leaching efficiency was obtained under the following conditions: sulfuric acid concentration, 1 mol/L; temperature, 90 °C; agitation speed, 600 rpm; pulp density, 1%; initial Cu2+ concentration, 10,000 mg/L; and O2 flow rate, 1000 cc/min. The leaching data and analyses indicate that the Cu leaching from PCBs followed the reaction-controlled model satisfactorily and determined that the activation energy was found to be 23.8 kJ/mol. Therefore, these results indicate that the sulfuric acid solution with Cu2+ and O2 as a mild leach medium without strong oxidants such as HNO3, H2O2, and Fe3+ is valid for Cu leaching from PCBs.Keywords
This publication has 42 references indexed in Scilit:
- Leaching of tin from waste Pb-free solder in hydrochloric acid solution with stannic chlorideHydrometallurgy, 2016
- Removal of Zn from Contaminated Sediment by FeCl3 in HCl SolutionMetals, 2015
- Separation of Sn from waste Pb-free Sn–Ag–Cu solder in hydrochloric acid solution with ferric chlorideHydrometallurgy, 2015
- The effects of temperature and agitation speed on the leaching behaviors of tin and bismuth from spent lead free solder in nitric acid leach solutionGeosystem Engineering, 2015
- Separation of Tin, Silver and Copper from Waste Pb-free Solder Using Hydrochloric Acid Leaching with Hydrogen PeroxideMATERIALS TRANSACTIONS, 2014
- The ammonia leaching of alloy produced from waste printed circuit boards smelting processGeosystem Engineering, 2013
- Recovery of Sn, Ag and Cu from Waste Pb-Free Solder Using Nitric Acid LeachingMATERIALS TRANSACTIONS, 2012
- Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solutionHydrometallurgy, 2011
- Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp millWaste Management, 2009
- Effect of cuprous ions on Cu leaching in the recycling of waste PCBs, using electro-generated chlorine in hydrochloric acid solutionMinerals Engineering, 2008