Reaction kinetics and thermal properties of cyanate ester‐cured epoxy resin with phenolphthalein poly(ether ketone)
Authors:
- 25 November 2008
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 111 (5) , 2590-2596
Abstract
This article describe the influence of phenolphthalein poly (ether ketone) (PEK‐C) on the cure behaviors and thermal properties of the diglycidyl ether of bisphenol A (DGEBA) epoxy resin with cyanate ester as curing agent. The curing kinetics and reaction pathways were monitored using dynamic differential scanning calorimeter and Fourier transform infrared spectroscopy. The dependence of activation energy on the conversion degree for all the studied systems was calculated in the light of Ozawa‐Flynn‐Wall method. Furthermore, the thermomechanical properties and the thermal stability of the cured resins were also evaluated by dynamic mechanical analysis and thermogravimetric analysis, respectively. Conclusions can be drawn as follows: the main reaction pathways did not vary with the inclusion of PEK‐C, but the reaction rate of the blend was found to be higher than that of the neat epoxy. The glass transition temperature of the blend was not changed by the addition of PEK‐C, while the initial decomposition temperature slightly decreased with increase in PEK‐C content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 23 references indexed in Scilit:
- Diglycidyl ether of bisphenol‐A epoxy resin modified using poly(ether ether ketone) with pendent tert‐butyl groupsJournal of Polymer Science Part B: Polymer Physics, 2007
- Thermal properties and toughness performance of hyperbranched‐polyimide‐modified epoxy resinsJournal of Polymer Science Part B: Polymer Physics, 2006
- Cure reaction and phase separation behavior of cyanate ester‐cured epoxy/polyphenylene oxide blendsJournal of Applied Polymer Science, 2006
- The effect of different metallic catalysts on the coreaction of cyanate/epoxyJournal of Applied Polymer Science, 2006
- Morphology and fracture properties relationship of epoxy‐diamine systems simultaneously modified with polysulfone and poly(ether imide)Polymer Engineering & Science, 2005
- Effects of epoxy content on dynamic mechanical behaviour of PEI‐toughened dicyanate–novolac epoxy blendsPolymer International, 2004
- Cure behavior, morphology, and mechanical properties of the melt blends of epoxy with polyphenylene oxideJournal of Applied Polymer Science, 2000
- Rubber‐modified epoxies: III. Influence of the rubber molecular weight on the phase separation processPolymer International, 1994
- Toughening mechanism for a rubber-toughened epoxy resin with rubber/matrix interfacial modificationJournal of Materials Science, 1991
- Morphology and toughness characterization of epoxy resins modified with amine and carboxyl terminated rubbersPolymer, 1982