Influence of BFRP Strengthening Layout on the Performance of Damaged RC Beam–Column Joints
Open Access
- 22 May 2026
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (6) , 283
Abstract
Basalt fiber-reinforced polymer (BFRP) composites are increasingly considered as a sustainable alternative to traditional FRP systems for the strengthening of reinforced concrete (RC) structures, owing to their favorable mechanical properties, durability, and lower environmental impact. This study investigates the effectiveness of externally bonded BFRP strips for the strengthening of RC beam–column joints, with particular attention to the influence of strengthening layout on the structural response. An experimental program was carried out on full-scale RC beam–column joint specimens subjected to monotonic loading with load–unload cycles of increasing amplitude. Each specimen was first tested in its original configuration to induce controlled damage and subsequently strengthened using BFRP strips arranged according to two different layouts. This approach enabled a direct comparison between the behaviour of pre-damaged and retrofitted specimens and allowed the contribution of the BFRP reinforcement to be clearly identified. BFRP strengthening markedly improves joint performance, enhancing strength, ductility, and energy dissipation while limiting stiffness degradation. The results underline the critical role of the strengthening layout in governing the effectiveness of the composite system, as well as the influence of substrate cracking in the activation of the BFRP reinforcement.Keywords
Funding Information
- Ministry of University and Research (DM MUR 1062/2021)
- Ministry of University and Research (I31B21005420007)
- Ministry of University and Research (DM MUR 1061/2021)
- Ministry of University and Research (I31B21005710007)
This publication has 42 references indexed in Scilit:
- Analytical model to predict crack width and spacing of reinforced concrete elements externally strengthened with fiber reinforced polymersStructural Concrete, 2025
- Seismic behaviour of Exterior RC beam-column joints repaired and strengthened using post-tensioned metal strapsBulletin of Earthquake Engineering, 2024
- Sustainable Fiber‐Reinforced Composites: A ReviewAdvanced Sustainable Systems, 2022
- Damaged RC beams strengthened with NSM CFRP rectangular rods under vibration in different constrain conditionsComposite Structures, 2016
- Retrofitting of interior RC beam–column joints using CFRP strengthened SHCC: Cast-in-place solutionComposite Structures, 2015
- Strengthening and rehabilitation of RC beam–column joints using carbon‐FRP jacketing and epoxy resin injectionEarthquake Engineering & Structural Dynamics, 2008
- Local retrofit of exterior RC beam–column joints using thin RC jackets—An experimental studyEarthquake Engineering & Structural Dynamics, 2007
- Characteristics of basalt fiber as a strengthening material for concrete structuresComposites Part B: Engineering, 2005
- Draft recommendation forin situ concrete strength determination by combined non-destructive methodsMaterials and Structures, 1993
- Seismic Design of Reinforced Concrete and Masonry Buildings1992