Effects of Stress and Plastic Deformation on the Corrosion of Steel
Author:
- 1 May 1970
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 26 (5) , 189-199
Abstract
The rate and type of corrosion exhibited by mild steel in the annealed, stressed, and plastically deformed state have been investigated. Precise electrochemical techniques provided potential and polarization data to supplement the results of chemical corrosion tests. Experiments were conducted in 0.6M NH4NO3 solutions in which steel exhibits active-passive dissolution behavior as well as localized corrosion. At active potentials, the anodic polarization curves for annealed and deformed specimens were nearly identical, with only slight increases in current densities for the deformed steel. Results at passive potentials demonstrated that increased plastic deformation can markedly decrease the passive potential range, the stability of passivity, and the ability to passivate. At certain passive potentials, the deformed steel exhibited current densities that were 400 times greater than those for annealed steel. The effects of pH, chloride ions, and crevices on the corrosion of deformed steel were examined in detail. The differences between the dissolution behavior of annealed and deformed steel were most distinctive in the approximate pH range of 3 to 6. This work is relevant to the understanding of the initiation of localized corrosion and to anodic protection.Keywords
This publication has 18 references indexed in Scilit:
- The Pitting Potential of Stainless Steels in Chloride MediaJournal of the Electrochemical Society, 1966
- Environmental Factors Affecting the Critical Potential for Pitting in 18–8 Stainless SteelJournal of the Electrochemical Society, 1966
- Principles of metallographic etchingCorrosion Science, 1966
- Effect of Plastic Deformation on the Anodic Dissolution of Iron in AcidsJournal of the Electrochemical Society, 1966
- Effect of Impurities in Iron on Corrosion in AcidsJournal of the Electrochemical Society, 1965
- Potentiokinetic and corrosimetric investigations of the corrosion behaviour of alloy steelsCorrosion Science, 1963
- Corrosion of Iron in Solutions Containing Ammonium NitrateCorrosion, 1962
- An Electrode Mount for Electrochemical Studies of Stressed Metal SpecimensJournal of the Electrochemical Society, 1962
- The Effect of Cold Work and Heat Treatment On the Rate of Dissolution of Pure and of Impure Aluminum in Acids and BasesCorrosion, 1956
- Galvanic Potentials of Grains and Grain Boundaries in Copper AlloysJournal of the Electrochemical Society, 1956