Optimal Design of Gear Ratios and Offset for Energy Conservation of an Articulated Manipulator
Authors:
- 12 May 2009
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 6 (3) , 551-557
Abstract
It is important to minimize the energy dissipated by the reduction gears and motors in a three-jointed vertically articulated manipulator. This paper proposes an optimal design method for simultaneously determining eight design variables, which are three motor masses, three reduction gear ratios, a counterbalancer mass for the third link and an offset between the first and the second links. Using these design variables, the equation of motion and the dissipated energy can be expressed as functions of the moment of inertia and the Coulomb friction torque of the joints and the inertia matrix of the manipulator. Optimal design variables can be determined by minimizing the dissipated energy under the constraint conditions for the motors and the offset. The numbers of stages for the reduction gear trains are determined from the optimal gear ratios. Simulations show that the proposed design method can reduce the dissipated energy more effectively than the inertia matching method.Keywords
This publication has 10 references indexed in Scilit:
- Comparison of various balance systems for energy conservation in a vertically articulated manipulator with three jointsAdvanced Robotics, 2007
- Minimum energy path search for a manipulator in consideration of all nonlinear characteristics by GA and its experimentsElectrical Engineering in Japan, 2006
- Optimal selection of motor and gearhead in mechatronic applicationsMechatronics, 2006
- Minimization of Dissipated Energy in Position Control System Considering the Friction of GearsTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2006
- Design for Saving Energy of a Vertically Articulated Manipulator Using Spring and Mass BalancersTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2004
- Trajectory Planning of Redundant Manipulators with Consumed Energy Minimization by Variational Approach.IEEJ Transactions on Industry Applications, 1997
- A Simple Technique to Passively Gravity-Balance Articulated MechanismsJournal of Mechanical Design, 1995
- Time-optimal motions of robots in assembly tasksIEEE Transactions on Automatic Control, 1986
- A Constant Force Generation MechanismJournal of Mechanical Design, 1985
- Two-Point Boundary-Value-Problem Techniques1966