Experimental and numerical investigation on failure behavior of ring joints in precast concrete shear walls
Authors:
Open Access
- 29 July 2019
- journal article
- research article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 23 (1) , 118-131
Abstract
Precast shear wall structures have been widely used due to their outstanding features, and the joints between precast members play a critical role in complete structures, specifically for vertical joints. The ring joint is a new connection method used for the vertical connection. Few studies and related regulations were traced; therefore more detailed studies are required. In order to study the anchoring performance and failure behavior, an experimental model was designed and tested under monotonic axial loading, taking the composite height of ring rebars, concrete specifications, diameter of the horizontal rebars, relative position of the ring rebars, diameter of the ring rebars, and number of horizontal rebars into consideration. The failure phenomena were observed and the data were collected. The failure pattern, bearing capacity, yield ratio, displacement ductility coefficient, and other performance parameters were analyzed. The study indicated that the failure patterns are divided into ring rebar pull-out and ring rebar fracture. Increasing the composite height of the ring rebar, the concrete specifications and the number of horizontal rebars could improve the bearing performance, and the contribution of the horizontal rebar diameter was limited, and interlocking ring rebars arranged uniformly are not optimal. In the case of joint failure, the yield ratio is relatively small and the displacement ductility coefficient is larger, which shows the bearing capacity reserve is better. A numerical model was established to analyze the internal behavior, and the results were in good agreement with the experimental results, important for us to understand the failure behavior. Design recommendations will promote its application.Keywords
Funding Information
- the Special Project of National Key Research and Development Plan (2017YFC0703804)
This publication has 15 references indexed in Scilit:
- Experimental evaluation of precast concrete sandwich wall panels with steel–glass fiber–reinforced polymer shear connectorsAdvances in Structural Engineering, 2017
- An innovative joint connecting beam for precast concrete shear wall structuresStructural Concrete, 2016
- Performance and confining mechanism of grouted deformed pipe splice under tensile loadAdvances in Structural Engineering, 2016
- Performance Evaluation of Semi Precast Concrete Beam-Column Connections with U-Shaped StrandsAdvances in Structural Engineering, 2014
- Seismic behavior of T‐shaped steel reinforced concrete shear walls in tall buildings under cyclic loadingThe Structural Design of Tall and Special Buildings, 2014
- Precast concrete structures in the futureStructural Concrete, 2014
- Towards Non–Standard Numerical Modeling of Thin-Shell Structures: Geometrically Linear FormulationInternational Journal for Computational Methods in Engineering Science and Mechanics, 2014
- Horizontal Connections for Precast Concrete Shear Wall Panels Under Cyclic Shear LoadingPCI Journal, 1996
- Horizontal Connections for Precast Concrete Shear Walls Subjected to Cyclic Deformations Part 2: Prestressed ConnectionsPCI Journal, 1995
- Horizontal Connections for Precast Concrete Shear Walls Subjected to Cyclic Deformations Part 1: Mild Steel ConnectionsPCI Journal, 1995