Determining discharge coefficient of labyrinth and arced labyrinth weirs using support vector machine
- 3 March 2017
- journal article
- research article
- Published by IWA Publishing in Hydrology Research
- Vol. 49 (3) , 924-938
Abstract
A labyrinth weir is a linear weir folded in plan-view which increases the crest length and the flow rate for a given channel width and an upstream flow depth. The present study aimed at determining discharge coefficients of labyrinth and arced labyrinth weirs using support vector machine (SVM)-based models. A total of 527 laboratory test data of four types of weirs, namely, Normal and Inverted orientation Labyrinth Weirs in flume (NLW, ILW) and Arced Labyrinth Weirs with and without nappe Breakers in reservoir (ALW, ALWB), were captured from the published literature and utilized to feed the SVM-based models. The obtained results revealed the capability of the SVM-based models in determining discharge coefficients. The results showed that the SVM-based model of arced labyrinth weir (ALW) produced the most accurate results when three dimensionless parameters, e.g. (HT/P) head water ratio, (α/θ) angle ratio and (Lc/W) magnification ratio, were introduced as input parameters (Root mean square error [RMSE]= 0.013 and R2 = 0.970 for the test stage). Nonetheless, sensitivity analysis showed that Froude number and head water ratio are the most influential parameters on discharge coefficients of the labyrinth and arced labyrinth weirs, respectively.Keywords
This publication has 18 references indexed in Scilit:
- Discharge coefficient of rectangular sharp-crested side weirs Part II: Domínguez's methodFlow Measurement and Instrumentation, 2014
- Modeling energy dissipation over stepped spillways using machine learning approachesJournal of Hydrology, 2014
- Labyrinth Weirs: Nappe Interference and Local SubmergenceJournal of Irrigation and Drainage Engineering, 2012
- Support vector machine approach for longitudinal dispersion coefficients in natural streamsApplied Soft Computing, 2011
- Application of least square support vector machines in the prediction of aeration performance of plunging overfall jets from weirsExpert Systems with Applications, 2009
- Prediction of aeration efficiency on stepped cascades by using least square support vector machinesExpert Systems with Applications, 2009
- Estimation of daily suspended sediments using support vector machinesHydrological Sciences Journal, 2008
- Flood forecasting using support vector machinesJournal of Hydroinformatics, 2007
- Discharge Rating Curve Extension – A New ApproachWater Resources Management, 2005
- Support-vector networksMachine Learning, 1995