Changes in Corrosion Resistance of 18%Cr-12%Ni-Type Stainless Steels After Sensitization
Authors:
- 1 October 2001
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 57 (10) , 874-883
Abstract
Intergranular corrosion resistances of 18%Cr-12%Ni-2.5%Mo and 18%Cr-12%Ni-0.64%Ti austenitic stainless steels annealed at 723 K to 1,223 K were examined by two electrochemical potentiostatic reactivation (EPR) methods (single-loop and double-loop) and by the Strauss test. The 18%Cr-12%Ni-0.64%Ti steel was subjected to three thermal cycles in a device for simulating thermal-deformation welding cycles prior to annealing. The time-temperature sensitization diagrams for the analyzed steels were constructed. Corrosion resistances of the steels were related to results of phase analysis performed with the help of energy dispersive x-ray spectroscopy (EDX) and electron diffraction. The M23C6 carbide was found to be the dominant phase responsible for the sensitization of both investigated steels. The sensitizing effect of σ-phase was considered to be a secondary influence, particularly in Ti-stabilized steel.Keywords
This publication has 19 references indexed in Scilit:
- Corrosion resistance of 18Cr-12Ni-2,5Mo steelannealed at 500–1050°CCorrosion Science, 1999
- Influence of thermal aging on the intergranular corrosion resistance of types 304LN and 316LN stainless steelsMetallurgical and Materials Transactions A, 1996
- Grain boundary structure and chromium segregation in a 316 stainless steelActa Metallurgica et Materialia, 1991
- A stem study of the effect of precipitation on grain boundary chemistry in AISI 304 steelActa Metallurgica et Materialia, 1991
- Grain boundary segregation in austenitic stainless steels and its effect on intergranular corrosion and stress corrosion crackingMetallurgical Transactions A, 1988
- Advanced Scanning Electron Microscopy and X-Ray Microanalysis1986
- Precipitate phases in type 316 austenitic stainless steel resulting from long-term high temperature serviceMaterials Science and Engineering, 1981
- Auger electron spectroscopy of stoichiometric chromium carbides and carbide precipitates at grain boundaries of type 304 stainless steelScripta Metallurgica, 1979
- Precipitation of (Fe, Cr) sigma phase from austeniteActa Metallurgica, 1966
- Deutung der ursachen der interkristallinen korrosion von nichtrostenden stählen in zusammenhang mit der chromverarmungstheorieCorrosion Science, 1964