Thermo-mechanical properties and sustainability analysis of newly developed eco-friendly structural foamed concrete by reusing palm oil fuel ash and eggshell powder as supplementary cementitious materials
- 20 March 2021
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (29) , 38947-38968
Abstract
The production of cement contributes to 10% of global carbon dioxide (CO2) pollution and 74 to 81% towards the total CO2 pollution by concrete. In addition to that, its low strength-to-weight ratio, high density and thermal conductivity are among the few limitations of heavy weight concrete. Therefore, this study was carried out to provide a solution to these limitations by developing innovative eco-friendly lightweight foamed concrete (LFC) of 1800 kg/m3 density incorporating 20–25% palm oil fuel ash (POFA) and 5–15% eggshell powder (ESP) by weight of total binder as supplementary cementitious material (SCM). The influence of combined utilization of POFA and ESP on the fresh state properties of eco-friendly LFC was determined using the J-ring test. To determine the mechanical properties, a total of 48 cubes and 24 cylinders were prepared for compressive strength, splitting tensile strength and modulus of elasticity each. A total of 24 panels were prepared to determine the thermal properties in terms of surface temperature and thermal conductivity. Furthermore, to assess the environmental impact and eco-friendliness of the developed LFC, the embodied carbon and eco-strength efficiency was calculated. It was determined that the utilization of POFA and ESP reduced the workability slightly but enhanced the mechanical properties of LFC (17.05 to 22.60 MPa compressive strength and 1.43 to 2.61 MPa tensile strength), thus satisfies the ACI213R requirements for structural lightweight concrete and that it can be used for structural applications. Additionally, the thermal conductivity reduced ranging from 0.55 to 0.63 W/mK compared to 0.82 W/mK achieved by control sample. Furthermore, the developed LFC showed a 16.96 to 33.55% reduction in embodied carbon and exhibited higher eco-strength efficiency between 47.82 and 76.97%. Overall, the combined utilization of POFA and ESP as SCMs not only enhanced the thermo-mechanical performance, makes the sustainable LFC as structural lightweight concrete, but also has reduced the environmental impacts caused by the disposal of POFA and ESP in landfills as well as reducing the total CO2 emissions during the production of eco-friendly LFC.Keywords
Funding Information
- Universiti Tun Hussein Onn Malaysia (FRGS RACER (Fundamental Research Grant Scheme for Research Acculturation of Early Career Researchers) RACER/1/2019/TK06/UTHM/1, FRGS RACER K140, GPPS-H684)
This publication has 36 references indexed in Scilit:
- Toward Green Concrete for Better Sustainable EnvironmentProcedia Engineering, 2014
- Life cycle greenhouse gas emissions of blended cement concrete including carbonation and durabilityThe International Journal of Life Cycle Assessment, 2013
- Global strategies and potentials to curb CO2 emissions in cement industryJournal of Cleaner Production, 2013
- Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concreteConstruction and Building Materials, 2013
- Assessment of CO2 reduction of alkali-activated concreteJournal of Cleaner Production, 2013
- The Impact of Anthropogenic Heat on Formation of Urban Heat Island and Energy Consumption BalanceUrban Studies Research, 2011
- Challenges and issues in moving towards sustainable landfilling in a transitory country - MalaysiaWaste Management & Research: The Journal for a Sustainable Circular Economy, 2010
- Analytical Study on Special Concretes with M20 & M25 Grades for ConstructionInternational Journal of Current Engineering and Technology, 2010
- Green house gas emissions due to concrete manufactureThe International Journal of Life Cycle Assessment, 2007
- Mesoscale and microscale evaluation of surface pavement impacts on the urban heat island effectsInternational Journal of Pavement Engineering, 2006