Noise and Vibration Prediction of a Six-Phase IPMSM in a Single Open-Phase Failure Under a Negative Sequence Current Compensated Fault Tolerant Control Mode
- 26 January 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (8) , 1-6
Abstract
Due to a multiphase configuration, six-phase interior permanent magnet synchronous machines (IPMSMs) exhibit the inherent reliability and fault-tolerant capabilities. Using a fault-tolerant control (FTC) method, the machine is still able to deliver the desired torque under the open-phase fault with a potential degradation in its efficiency and vibration behavior. The vibroacoustic characteristics of the IPMSM under the faulty operation during the FTC mode have not been studied in the literature. To fill this knowledge gap, the simulation and experiment-based noise and vibration (NV) analysis of a six-phase IPMSM in a single open-phase condition using a negative sequence current-compensated FTC mode is studied in this article. First, the whole procedure of the NV analysis for the IPMSM model is introduced. The calculation of the electromagnetic (EM) force is then studied to explore the main excitation of the vibration in the system. After this, the NV synthesis is carried out and the simulation results of the NV under a negative sequence current-compensated FTC mode are obtained. It is found that the 28th order of the flux density spatial harmonics component influences vibration the most. Finally, the NV predictions in both healthy mode and controlled faulty mode are verified by experiments.Keywords
This publication has 15 references indexed in Scilit:
- PMSM Open-Phase Fault-Tolerant Control Strategy Based on Four-Leg InverterIEEE Transactions on Power Electronics, 2019
- Open-Phase Fault Modeling and Optimized Fault-Tolerant Control of Dual Three-Phase Permanent Magnet Synchronous MachinesIEEE Transactions on Power Electronics, 2019
- Comprehensive Diagnosis and Tolerance Strategies for Electrical Faults and Sensor Faults in Dual Three-Phase PMSM DrivesIEEE Transactions on Power Electronics, 2018
- Analysis of Vibration in Modular Fault-tolerant PMSM under One-phase Open-circuit Fault2018
- Comparison of Main Magnetic Force Computation Methods for Noise and Vibration Assessment in Electrical MachinesIEEE Transactions on Magnetics, 2018
- Noise-Vibration-Harshness-Modeling and Analysis of a Permanent-Magnetic Disc Rotor Axial-Flux Electric MotorIEEE Transactions on Magnetics, 2017
- Application of Sinusoidal Field Pole in a Permanent-Magnet Synchronous Machine to Improve the NVH Behavior Considering the MTPA and MTPV Operation AreaIEEE Transactions on Industry Applications, 2016
- A Fault-Tolerant Direct Torque Control for Six-Phase Permanent Magnet Synchronous Motor With Arbitrary Two Opened Phases Based on Modified VariablesIEEE Transactions on Energy Conversion, 2015
- Torque Improvement of Dual Three-Phase Permanent-Magnet Machine With Third-Harmonic Current InjectionIEEE Transactions on Industrial Electronics, 2015
- Electromagnetic and mechanical characterizations of noise and vibration in permanent magnet synchronous machinesIEEE Transactions on Magnetics, 2006