Role of Dynamic Response in Inclined Transverse Crack Inspection for 3D-Printed Polymeric Beam with Metal Stiffener
Open Access
Abstract
This paper aims to quantify the relationship between the dynamic response of 3D-printed polymeric beams with metal stiffeners and the severity of inclined transverse cracks under mechanical loading. Very few studies in the literature have focused on defects starting from bolt holes in light-weighted panels and considered the defect’s orientation in an analysis. The research outcomes can be applied to vibration-based structure health monitoring (SHM). In this study, an acrylonitrile butadiene styrene (ABS) beam was manufactured through material extrusion and bolted to an aluminium 2014-T615 stiffener as the specimen. It simulated a typical aircraft stiffened panel geometry. The specimen had seeded and propagated inclined transverse cracks of different depths (1/1.4 mm) and orientations (0°/30°/45°). Then, their dynamic response was investigated numerically and experimentally. The fundamental frequencies were measured with an experimental modal analysis. The numerical simulation provided the modal strain energy damage index (MSE-DI) to quantify and localise the defects. Experimental results showed that the 45° cracked specimen presented the lowest fundamental frequency with a decreased magnitude drop rate during crack propagation. However, the 0° cracked specimen generated a more significant frequency drop rate with an increased crack depth ratio. On the other hand, several peaks were presented at various locations where no defect was present in the MSE-DI plots. This suggests that the MSE-DI approach for assessing damage is unsuitable for detecting cracks beneath stiffening elements due to the restriction of the unique mode shape at the crack’s location.Keywords
This publication has 25 references indexed in Scilit:
- A review of melt extrusion additive manufacturing processes: I. Process design and modelingRapid Prototyping Journal, 2014
- Improvement of a vibration-based damage detection approach for health monitoring of bolted flange joints in pipelinesStructural Health Monitoring, 2013
- Development of scanning damage index for the damage detection of plate structures using modal strain energy methodMechanical Systems and Signal Processing, 2009
- Stress intensity factors for surface cracks at countersunk holesEngineering Fracture Mechanics, 2006
- A Review of Vibration-based Structural Health Monitoring with Special Emphasis on Composite MaterialsThe Shock and Vibration Digest, 2006
- A SIMPLIFIED METHOD FOR NATURAL FREQUENCY ANALYSIS OF A MULTIPLE CRACKED BEAMJournal of Sound and Vibration, 2001
- A global non-destructive damage assessment methodology for civil engineering structuresInternational Journal of Systems Science, 2000
- Comparative study of damage identification algorithms applied to a bridge: II. Numerical studySmart Materials and Structures, 1998
- A CONTINUOUS CRACKED BEAM VIBRATION THEORYJournal of Sound and Vibration, 1998
- Analysis of the effect of cracks on the natural frequencies of a cantilever beamJournal of Sound and Vibration, 1991