Storage ring free-electron lasing at 176 nm--dielectric mirror development for vacuum ultraviolet free-electron lasers
- 10 August 2006
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 45 (23) , 5866-5870
Abstract
Mirrors for storage ring free-electron lasers in the vacuum ultraviolet must provide adequate reflectivity and resistance against synchrotron radiation. The free-electron laser system at ELETTRA (Trieste, Italy) is targeted to lase in the spectral range between 155 and . It was demonstrated that dense oxide multilayer coatings allow lasing down to . However, pure oxide systems show significant absorption at lower wavelengths and cannot be employed below 189.9 nm. Fluoride stacks can be deposited down to with high reflection values above , but their resistance against the harsh synchrotron environment is poor. They rapidly degrade; lasing cannot be realized with this mirror approach. For the range between 170 and , hybrid systems—combining fluoride and oxide materials—have been manufactured. With appropriate deposition procedures, mirrors achieve reflectance values up to and an adequate radiation resistance simultaneously. A mirror based on a conventional fluoride stack protected by a dense silicon dioxide protection layer was deposited and successfully employed for free-electron lasing at .
Keywords
This publication has 4 references indexed in Scilit:
- Ultraviolet optical and microstructural properties of MgF_2 and LaF_3 coatings deposited by ion-beam sputtering and boat and electron-beam evaporationApplied Optics, 2002
- Operation of the European storage ring FEL at ELETTRA down to 190nmNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2002
- Operation and performance of a free electron laser oscillator down to 190 nmApplied Physics Letters, 2002
- Microstructure and composition of MgF2 optical coatings grown on Si substrate by PVD and IBS processesThin Solid Films, 2000